Zasady działu: Kliknij, aby przejrzeć zasady tego działu
- Tytuł wątku powinien zawierać markę i pełny model sprzętu oraz skrótowy opis usterki.
- Treść wątku powinna zawierać dokładny opis usterki, co zostało sprawdzone/wymienione/zmierzone, wyniki tych działań, oznaczenie kodowe PCB (w przypadku napraw hardware) oraz sformułowane pytanie. W przypadku problemów z odczytaniem oznaczenia kodowego PCB, należy przeczytać TEN WĄTEK. Jeśli nadal nie można znaleźć oznaczenia, należy zamieścić wyraźne zdjęcia obu stron płyty - należy przy tym usunąć wszelkie folie i moduły, mogące ewentualnie zasłaniać oznaczenia płyty.
- Przed napisaniem nowego tematu, każdy użytkownik zobowiązany jest zapoznać się z wątkami w dziale SZKOLENIA i na ich podstawie dokonać próby wstępnej diagnostyki uszkodzenia.
- Nie jest dozwolone umieszczanie załączników w postaci kompletnych dokumentacji, a także jakichkolwiek wsadów BIOS / firmware (do tego służy dział PLIKI BIOS DO WERYFIKACJI). Dozwolone jest wyłącznie umieszczenie fragmentu dokumentacji, który ułatwi autorowi diagnostykę/naprawę sprzętu z wątku. W jednym poście można zamieścić nie więcej, niż jedną stronę instrukcji/schematu. Plik nie może posiadać widocznych znaków wodnych, napisów "confidential", adresów email etc.
- Nie jest dozwolone zamieszczanie linków do plików, znajdujących się na innych stronach internetowych.
- Nie jest dozwolone zakładanie tematu, który opisuje usterkę więcej niż jednego sprzętu. W takich przypadkach należy utworzyć osobne wątki dla każdego sprzętu.
- Nie jest dozwolone pisanie tematu lub postu, mającego charakter zapytania o schemat, boardview, zdjęcia płyty, wsad BIOS lub instrukcję serwisową. Do takich zapytań służy dział ZAPYTANIA O DOKUMENTACJE/BIOS.
Re: Re: Laptop ACER A315-51-52TW po zalaniu nie uruchamia się
przez Google Adsense [BOT] • 20 kwietnia 2020, 15:26
Measure the voltages to ground on pins 14, 14, 72, 74, 127 of KBC chip, when the laptop is turned off.
Measure the voltages to ground on pins 18, 95, 100, 112, 119, 120 of KBC chip in the following cases:
a) Laptop turned off (before pressing to the power button).
b) Laptop turned on (after pressing to the power button).
Measure the voltages to ground on pins 107, 123 in the following cases:
c) Power button released.
d) Power button pressed.
Measure the voltages to ground on pins 18, 95, 100, 112, 119, 120 of KBC chip in the following cases:
a) Laptop turned off (before pressing to the power button).
b) Laptop turned on (after pressing to the power button).
Measure the voltages to ground on pins 107, 123 in the following cases:
c) Power button released.
d) Power button pressed.
#84 Re: Laptop ACER A315-51-52TW po zalaniu nie uruchamia się
przez terabajt • 20 kwietnia 2020, 17:58
It's hard to do because power button is on keyboard.
Measure the voltages to ground on pins 14, 14, 72, 74, 127 of KBC chip, when the laptop is turned off.
14: 3.26V
72: 3.02V
74: 3.29V
127V: 3.29
Measure the voltages to ground on pins 18, 95, 100, 112, 119, 120 of KBC chip in the following cases:
a) Laptop turned off (before pressing to the power button) in every case is 0V
b) Laptop turned on (after pressing to the power button) in every case is 0V
Measure the voltages to ground on pins 107, 123 in the following cases:
c) Power button released.
107: 3.29V
123: 0V
d) Power button pressed.
107: 0V
123: 0V
Measure the voltages to ground on pins 14, 14, 72, 74, 127 of KBC chip, when the laptop is turned off.
14: 3.26V
72: 3.02V
74: 3.29V
127V: 3.29
Measure the voltages to ground on pins 18, 95, 100, 112, 119, 120 of KBC chip in the following cases:
a) Laptop turned off (before pressing to the power button) in every case is 0V
b) Laptop turned on (after pressing to the power button) in every case is 0V
Measure the voltages to ground on pins 107, 123 in the following cases:
c) Power button released.
107: 3.29V
123: 0V
d) Power button pressed.
107: 0V
123: 0V
#91 Re: Laptop ACER A315-51-52TW po zalaniu nie uruchamia się
przez Machine • 28 kwietnia 2020, 11:35
If you are satisfied with my help, look here:
integracja-funkcji-pomogl-z-zamykaniem-tematu-i-oznaczaniem-go-jako-rozwiazany-t11083.html
Helped to point
integracja-funkcji-pomogl-z-zamykaniem-tematu-i-oznaczaniem-go-jako-rozwiazany-t11083.html
Helped to point
#93 Re: Laptop ACER A315-51-52TW po zalaniu nie uruchamia się
przez Machine • 28 kwietnia 2020, 18:14
If you are satisfied with my help, look here:
integracja-funkcji-pomogl-z-zamykaniem-tematu-i-oznaczaniem-go-jako-rozwiazany-t11083.html
Helped to point
integracja-funkcji-pomogl-z-zamykaniem-tematu-i-oznaczaniem-go-jako-rozwiazany-t11083.html
Helped to point
After change KBC:
Voltages on pins 100, 112, 119 of KBC is 0V.
Voltage on battery RTC is 0.92V with RTC battery and 0.38V without RTC battery.
Present voltage on coil:
3.3V and 5V
and only when i connect the main battery and push power button, on RAM coil is 0.11V and on 5335 coil (g5335 - +1v_S5 ? - PL12? ) is 1V and then
on pin KBC:
100: 3.28V
112: 3.27V
119: 3.42V
Voltages on pins 100, 112, 119 of KBC is 0V.
Voltage on battery RTC is 0.92V with RTC battery and 0.38V without RTC battery.
Present voltage on coil:
3.3V and 5V
and only when i connect the main battery and push power button, on RAM coil is 0.11V and on 5335 coil (g5335 - +1v_S5 ? - PL12? ) is 1V and then
on pin KBC:
100: 3.28V
112: 3.27V
119: 3.42V
terabajt napisał(a):I try to erase KBC chip and after that, when i connect power supply nothing change but when i read the KBC chip it's programm itself.Erase the KBC chip again and reflash the BIOS chip with another dump.
terabajt napisał(a):Shouldn't be 3V on + on slot of RTC battery without battery? (It's rechargeable battery).No, the RTC battery on this board is not rechargeable.
After replace BIOS for another one and erase KBC nothing change.
After connect main battery andpessing the power button there is on KBC:
pin 18: 3.42V
pin 95: 3.28V
pin 100: 3.28V
pin 112: 3.27V
pin 119: 3.42V
pin 120: 3.27V
pin 107: 3.29V
pin 123: 3.28V
After change Chip PU5 to AYOA 7H6T (AOZ1331DI) fan not start after connect the power supply. It's ok?
What else can I check?
After connect main battery andpessing the power button there is on KBC:
pin 18: 3.42V
pin 95: 3.28V
pin 100: 3.28V
pin 112: 3.27V
pin 119: 3.42V
pin 120: 3.27V
pin 107: 3.29V
pin 123: 3.28V
After change Chip PU5 to AYOA 7H6T (AOZ1331DI) fan not start after connect the power supply. It's ok?
What else can I check?
Re: Laptop ACER A315-51-52TW po zalaniu nie uruchamia się
przez Google Adsense [BOT] • 5 maja 2020, 18:47
Kto przegląda forum
Użytkownicy przeglądający ten dział: Brak zidentyfikowanych użytkowników i 7 gości
_______________________________Wszelkie prawa zastrzeżone. Zabrania się kopiowania jakichkolwiek treści i elementów witryny bez zezwolenia.
Wszelkie opublikowane na tej stronie znaki handlowe, nazwy marek, produktów czy usług należą do ich prawnych właścicieli i zostały użyte wyłącznie w celach informacyjnych.