Forum rules: Click here to view the forum rules
- Topic title should contain: the device's manufacturer, full model and the brief description of problem.
- Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
- Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
- Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
- It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
- Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
Re: ASUS UX435E - zwarcie na płycie głównej
by Google Adsense [BOT] • 8 November 2025, 12:37
daro19862 wrote:resistance between pin 1 of capacitor C3424 and pin 1 of capacitor C3414 is 930 Ω reverse probe 830 ΩSorry, my mistake.
I meant pin 1 of C3414 and pin 1 of C3419, so also please measure this resistance.
However, pin 1 of C3424 is directly connected to the pin 1 of C3414, so this resistance should be close to 0Ω, but you measured around 1kΩ. Please, check your meter.
Check the following continuities:
- Between pin A5 of the Type-C port J3401 and pin 1 of capacitor C3454.
- Between pin B5 of the Type-C port J3401 and pin 1 of capacitor C3455.
- Between pin A5 of the Type-C port J3402 and pin 1 of capacitor C3456.
- Between pin B5 of the Type-C port J3402 and pin 1 of capacitor C3457.
It's best to use a USB Type-C test card:
- Between pin A5 of the Type-C port J3401 and pin 1 of capacitor C3454.
- Between pin B5 of the Type-C port J3401 and pin 1 of capacitor C3455.
- Between pin A5 of the Type-C port J3402 and pin 1 of capacitor C3456.
- Between pin B5 of the Type-C port J3402 and pin 1 of capacitor C3457.
It's best to use a USB Type-C test card:
I dont have C3454,C3455,C3456,C3457 mistake or you have different BV ?
I have this:
Pin 5,6 IC U3404 is connected to B5 J3402 and goes through the connector to test card pin name "VCC" (the description on test card is probably not correct)
Pin 4,7 IC U3404 is connected to test card pin name "D-" (the description on test card is probably not correct) I can't check the socket J3402 because I don't have access to the "Ax" pins.
Pin 5,6 IC U3403 is connected to B5 J3401 and goes through the connector to test card pin name "VCC" (the description on test card is probably not correct)
Pin 4,7 IC U3403 is connected to test card pin name "D-" (the description on test card is probably not correct) I can't check the socket J3401 because I don't have access to the "Ax" pins.
I have this:
Pin 5,6 IC U3404 is connected to B5 J3402 and goes through the connector to test card pin name "VCC" (the description on test card is probably not correct)
Pin 4,7 IC U3404 is connected to test card pin name "D-" (the description on test card is probably not correct) I can't check the socket J3402 because I don't have access to the "Ax" pins.
Pin 5,6 IC U3403 is connected to B5 J3401 and goes through the connector to test card pin name "VCC" (the description on test card is probably not correct)
Pin 4,7 IC U3403 is connected to test card pin name "D-" (the description on test card is probably not correct) I can't check the socket J3401 because I don't have access to the "Ax" pins.
daro19862 wrote:I dont have C3454,C3455,C3456,C3457 mistake or you have different BV ?That's strange.
I'm useing the BoardView UX435EG Rev: 2.2 From this post and there are all these capacitors. Which BoardView are you using exactly?
daro19862 wrote:(the description on test card is probably not correct)The pin descriptions on your test card seems fine to me.
Re: ASUS UX435E - zwarcie na płycie głównej
by Google Adsense [BOT] • 13 December 2025, 22:31
Who is online
Users browsing this forum: MendUsThis and 4 guests
_______________________________All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.