• Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

It is currently 13 January 2026, 17:42

Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

 Forum rules: Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#21 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 1 January 2026, 17:12
After opening jumper, always 3,4V
Do you know coil PL 401 value?
On PL401 (jumper side) I measure 0,2V without coil.

Re: Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by Google Adsense [BOT] • 1 January 2026, 17:12

#22 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 1 January 2026, 18:36
Measure the resistance to ground on the system side (pad close to the chip PU200) of the jumper PJP400.

valieromarco wrote:Do you know coil PL 401 value?
PL401= 1.5µH / 7.2ADC (11ASAT), 20%, dimensions: 5.19 x 5.18 x 3mm

#23 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 1 January 2026, 19:15
Resistance is 1,3 Mohm

#24 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 1 January 2026, 19:48
Measure the resistance to ground on pin 8 of chip UC28.

#25 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 1 January 2026, 20:51
Goes up quickly from 5 M ohm to OL

#26 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 1 January 2026, 22:05
Try to replace the chip PU400 (NB502GQ-Z).
If you don't have this chip, you can swap the chips PU400 and PU401 with each other (they are the same).

After replacing the chips, turn on the board with the jumpers PJP400, PJP401 opened to make sure you are getting correct voltages (5V) on the coils PL401, PL403. If so, close the jumpers and test the board again.

#27 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 1 January 2026, 22:56
So after that if all is ok I have to replace PU400?

#28 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 1 January 2026, 23:19
Yes, you have to.
If you swap the chips PU400 and PU401 with each other, and in case the PU400 is damaged, you will likely notice that the chip PU400 will not work properly in the place of PU401.

#29 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 1 January 2026, 23:48
Unfortunately the situation is the same

Upgrade 01.00 AM



Accidentally I touched a capacitor with my multimeter and now voltage on PL401 is 0V
I swap them again and I got voltage again but 4,4V without PL401 and around of PL401 zone PCB is warm
So P401 is damaged

Resistance to ground of PL401
Side PU400 = 270kohm
Side system = sometime drops to 42Kohm sometime rise to 42Kohm

Pin401 resistance to ground

1= 2,56 Mohm
3= rise up to 9,5 Mohm

#30 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 7 January 2026, 09:34
Remeasure the voltages to ground on pins 1, 3, 10, 12, 13, 15 of chip PU401 with the coil PL401 installed.

#31 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 7 January 2026, 11:05
PU401

1=8,4
3=3,5V
10=5,3V
12=0V
13=1V
15=3V

#32 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 7 January 2026, 21:41
valieromarco wrote:Accidentally I touched a capacitor with my multimeter and now voltage on PL401 is 0V
I swap them again and I got voltage again but 4,4V without PL401 and around of PL401 zone PCB is warm
So P401 is damaged
Something is not right here. The coil PL401 belongs to the chip PU400, while the chip PU401 belongs to the coil PL403. About which chip/coil exactly you are talking about?

#33 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 7 January 2026, 21:58
I wrote PU401 because I replaced PU400 with PU401
Now chip damaged is solder on PU401 with open jumper.
Working chip is solder on PU400

#34 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 7 January 2026, 22:56
valieromarco wrote:and now voltage on PL401 is 0V
You stated that there is 0V on the coil.

valieromarco wrote:PU401
13=1V
But this measurement shows that the voltage on the coil PL403 should be about 3V and not 0V.
Please, check your measurements.

#35 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 7 January 2026, 23:20
Ok I understand the mistake
I measured PU400 not PU401 because is 5V the power rail is missing, and I read PU400 instead of PU401.
Sorry.

So to measure 3V power rail power I have to swap chip again.
I’m going to swap them.

#36 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 9 January 2026, 00:26
PU401 with jumper pjp401 open and pjp400 open and with PL401 installed

1=8,4
3=3,53
10=6V
12=0V
13=1,2V
15=0,44V

#37 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 10 January 2026, 12:35
No one requested to exchange the chips with each other again.
However, everything is mixed up here. No one knows which chip/coil we are talking about anymore.

Let's start again from the beginning:
- Measure the resistances to ground on coils PL400, PL403.
- Measure the voltages to ground on pins 1, 3, 10, 12, 13, 15 of the chip that is currently soldered to the place of PU400.
- Measure the voltages to ground on pins 1, 3, 10, 12, 13, 15 of the chip that is currently soldered to the place of PU401.

#38 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by valieromarco • 10 January 2026, 12:50
Ok sorry
I will measure all again, just remember that one of two chip is damaged let me know where is better solder damaged chip?

#39 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by matic • 10 January 2026, 14:46
If you know that the chip is damaged, replace it immediately :frustry:
There is no point in wasting time diagnosing a chip that we already know is damaged.

Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

by Google Adsense [BOT] • 10 January 2026, 14:46
Similar Topics
  ASUS FX504G motherboard DABKLGMB8D0 REV: D battery not charging  [SOLVED]
Lenovo Z510 motherboard ailza NM-A181 Rev 1.0 problem with battery
Schemat Dell XPS 13 Plus 9320 Compal GDO31 LA-L071P
Schemat Dell XPS 13 9310 Compal FDO30 LA-J851P
Schemat Dell XPS 13 9305 Compal FDP30 LA-K461P
Schemat Dell XPS 13 9345 Compal IDP30 LA-L726P

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.