• Acer AN515, płyta LA-L181P REV:1C startuje na kilka sekund i gaśnie

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Acer AN515, płyta LA-L181P REV:1C startuje na kilka sekund i gaśnie


by poster 13 August 2025, 09:04
Acer AN515
płyta: LA-L181P REV:1C
CPU: SRKT1
GPU: GN20-P1-A1
PCH: SRKMA
KBC: ENE KB9052QD

Po wciśnięciu przycisku power zapala się niebieska dioda i gaśnie po kilku sekundach (5-6sec). W tym czasie pobór prądu wynosi 0.05A a jedyne co się nagrzewa pod termowizją to PCH (28 stopni).
Testowo przeprogramowałem bios oraz KBC wyodrębnionym wsadem, ale zachowanie płyty nie zmieniło się. Płyta ładuje baterię i sygnalizuje to poprawnie.

Pomiary po wciśnięciu przycisku power: (zapala się niebieska dioda, po kilku sekundach płyta wyłącza się)
PL501 = 5V
PL301 = 3.3V
PL1801 = 1.84V
PL1102 = 1.80V (czy to prawidłowe napięcie? na schemacie to +1.05VALW)
PLG101 = 1.80V
PLB2 = 16.3V (z podłączoną baterią)
Pozostałe cewki: 0V
8 noga układu SPI (UH4) = 3.3V

Poprzedni właściciel twierdzi że laptop zgasł nagle podczas pracy i już więcej nie odpalił. Po rozebraniu laptopa układ chłodzenia okazał się całkowicie zatkany kurzem.

Proszę o podpowiedzi w dalszej diagnozie.

Re: Acer AN515, płyta LA-L181P REV:1C startuje na kilka sekund i gaśnie


by Google Adsense [BOT] 13 August 2025, 09:04

#2 Re: Acer AN515, płyta LA-L181P REV:1C startuje na kilka sekund i gaśnie


by tekort 13 August 2025, 14:17
Podaj rezystancje na wszystkich cewkach płyty, szczególną uwagę zwróć na cewki CPU i wszystkie tranzystory od CPU, tzn. PUH2, PUH3, PUH4, PUH5. Na wszystkich tranzystorach CPU zmierz oporność do masy na pinach: 7, 11-12 (są wspólne)

Nie chce być złym prorokiem, ale PCH pewnie chciałby jeszcze popracować, ale "nie ma z kim gadać", więc sprzęt się po prostu wyłącza. Zapchany układ chłodzenia nie pomógł sprawie.

Re: Acer AN515, płyta LA-L181P REV:1C startuje na kilka sekund i gaśnie


by Google Adsense [BOT] 13 August 2025, 14:17

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.