• TDSYSTEMS K55DLT6F override LED Driver protection

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 TDSYSTEMS K55DLT6F override LED Driver protection


by Zemog 25 June 2025, 13:16
Hello everyone!

I have this TDSYSTEMS TV with MAIN CV9203H-A50, which sometimes turns on without any problems, and other times (most of the time), the LEDs flash for a second and then turn off, but the TV continues to work and the image is blank.

I need to override the LED protection for testing. Can anyone tell me how? I haven't found what the LED driver is. There are no components on the back of the main unit.

I found a post on another forum where someone was able to override it by replacing the PR115 resistor with a 2.7 ohm resistor and removing the SMD resistor marked in the photo. In my case, I tried it and it didn't work.

Any suggestions?


Image

Re: TDSYSTEMS K55DLT6F override LED Driver protection


by Google Adsense [BOT] 25 June 2025, 13:16

#2 Re: TDSYSTEMS K55DLT6F override LED Driver protection


by matic 25 June 2025, 17:34
Hello!

Please, post clear picture of marked area of the board with visible markings on the components.
Image

#3 Re: TDSYSTEMS K55DLT6F override LED Driver protection


by Zemog 25 June 2025, 18:16
Is this correct?
The 8-pin chip is AS358M

Image

Edit: I leave here another photo where the marks of the resistors can be seen better.

Image

Re: TDSYSTEMS K55DLT6F override LED Driver protection


by Google Adsense [BOT] 25 June 2025, 18:16

Who is online

Users browsing this forum: No registered users and 5 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.