• Gigabyte GA-A320M S2H brak zasilania CPU

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Gigabyte GA-A320M S2H brak zasilania CPU


by gzb90 3 December 2020, 16:58
Obsada płyty:

KBC: IT8686E
PCH: 218-0891004
Kontroler PWM dla zasilania CPU: ISL95712

Płyta się uruchamia jednak nie załączają się przetwornice CPU. Płyty nie idzie wyłączyć za pomocą przycisku POWER.
Bateria CR2032: 3V
Zasilanie kości BIOS: 1,8V
Zasilanie PCH: 1,05V

Pomiary na KBC po uruchomieniu:
3VSTB - 3,3v (pin 64)
ATX_PWROK - 5V (48)
PWROK - 3,3V (61)
VCORE - 1,96 (65)
VCC_ENABLE_5 - 30mV (81)
VCC_1.8_EN - 2,9V (41)
PCH_VRM_PGD - 2,7mV (85)

Pomiary na kontrolerze PWM:
VDD - 2,23V
ENABLE - 3V
PWROK - 200mV
PGOOD - 44mV
PWRGD_NB - 0V

Pomiar mosfetów w sekcji zasilania CPU nie wykazał nic niepokojącego.

Napięcie na USB: 5,2V, opór na liniach sygnałowych względem masy (na wyłączonej płycie): 2,3MOhm

Pomiary na cewkach:
Image

Z racji braku sygnału PWRGD_NB oraz braku możliwości wyłączenia płyty podejrzewam uszkodzenie mostu. Dodam tylko że próba polegająca na wygrzaniu go nie dała żadnego efektu.

Re: Gigabyte GA-A320M S2H brak zasilania CPU


by Google Adsense [BOT] 3 December 2020, 16:58

#2 Re: Gigabyte GA-A320M S2H brak zasilania CPU


by xamledyD 4 December 2020, 10:49
Witam.
Podstawiałeś inny procesor?
Programowałeś BIOS?
Czy most nie przegrzewa się po uruchomieniu płyty?
Pozdrawiam

#3 Re: Gigabyte GA-A320M S2H brak zasilania CPU


by gzb90 5 December 2020, 01:01
xamledyD wrote:Podstawiałeś inny procesor?

Tak
xamledyD wrote:Programowałeś BIOS?

Tak
xamledyD wrote:Czy most nie przegrzewa się po uruchomieniu płyty?

Nie

#4 Re: Gigabyte GA-A320M S2H brak zasilania CPU


by gzb90 28 January 2021, 01:53
Temat rozwiązany, uszkodzony tranzystor załączający napięcie +5V - VDD do kontrolera PWM. Zmierzone napięcie 2,23V prawdopodobnie pochodziło z szyny I2C.

Re: Gigabyte GA-A320M S2H brak zasilania CPU


by Google Adsense [BOT] 28 January 2021, 01:53

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.