• HP Pavilion 17-cd2254ng - Po zalaniu, brak reakcji na przycisk

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP Pavilion 17-cd2254ng - Po zalaniu, brak reakcji na przycisk


by Golima 4 January 2026, 13:23
Dzień Dobry

Model: HP Pavilion 17-cd2254ng
Płyta: LA-011P REV 1.0

PL302 - Mohm
PL301 - Kohm
PLB(8)1 - Mohm
PLM1 - 400 ohm (przetwornica RAM, bez RAM)
PLZ1,2 - 38ohm
PLG1 - 120 ohm
PLV1,2,3 - 0,5 ohm
PLW1 - 40 ohm
PL801 - 600 ohm

20V jest. Brak 3.3/5V, LDO 3.3V obecne na KBC.
Generalnie laptop miał zalanie w okolicy KBC, oczyściłem. Nic nie jest zjedzone.
Laptop przez diagnozą uruchamiał się, ładował system, podczas logowania wyłączał się.

Obecnie jest brak reakcji na przycisk, nie mam schematu ani boardview i jest ciężko coś tutaj dla laika dalej szukać.
Proszę o wsparcie.

BTW. Najlepszego w Nowym Roku !

Dzięki.

Re: HP Pavilion 17-cd2254ng - Po zalaniu, brak reakcji na przycisk


by Google Adsense [BOT] 4 January 2026, 13:23

Who is online

Users browsing this forum: No registered users and 27 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.