• HP Pavilion 15-cs3019TX can't switch on

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP Pavilion 15-cs3019TX can't switch on


by cygron 14 December 2025, 13:45
Model - HP Pavilion 15-cs3019TX
Board id - DAG7BMB68C0 REV-C

Laptop can't switch on. When press power key, power led is on but only 4 coils have voltages 3.3v, 5v and 1.8v. Others coils have 0v. 3.3v and 5v are appear only when press power key. Without press power key, there have no 3.3v and 5v. Need help.

Image

Re: HP Pavilion 15-cs3019TX can't switch on


by Google Adsense [BOT] 14 December 2025, 13:45

#2 Re: HP Pavilion 15-cs3019TX can't switch on


by Vogelek23 14 December 2025, 23:39
First, try to reflash the EC controller (ITE5570E). You can extract EC firmware from 16MB BIOS dump, it starts at 0xA50000 address and is 0x20000 long (128kB). Or you can just erase EC firmware completely from EC chip and it should reflash automatically when the power supply is connected (do not disconnect power for at least 1 minute to allow EC auto-flashing from BIOS).

#3 Re: HP Pavilion 15-cs3019TX can't switch on


by cygron 16 December 2025, 08:07
Can I reprogram the ITE5570E using an RT809F without a dedicated PEB-1 expansion board.

Re: HP Pavilion 15-cs3019TX can't switch on


by Google Adsense [BOT] 16 December 2025, 08:07

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.