• Dell N4110 can't switch on

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Dell N4110 can't switch on


by cygron 28 July 2025, 08:45
Model : Dell N4110
Board id: DAV02AMB8F1 Rev: F

Laptop can't switch on. 3V 5V is ok. When press power key, RUN_ON is not coming. BIOS and EC flashing can't solve the problem. Need help.

Re: Dell N4110 can't switch on


by Google Adsense [BOT] 28 July 2025, 08:45

#3 Re: Dell N4110 can't switch on


by cygron 1 August 2025, 15:51
PL10 - 5V
PL11 -3.3V
PL3 - 0.2V (Without Battery)
All other coils have 0V.

Resistance to ground on coils
PL10 - about 1K
PL11 - 170 Ohm
PL3 - about MOhm
PL8 - 330 Ohm
PL9 - 430 Ohm
PL4 - 5 Ohm
PL1 - 26 Ohm
PL2 - 14 Ohm

Re: Dell N4110 can't switch on


by Google Adsense [BOT] 1 August 2025, 15:51

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.