• AN515-54-55EP brak 3.3v brak reakcji

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 AN515-54-55EP brak 3.3v brak reakcji


by przemekzn 7 November 2025, 12:52
Witam, laptop AN515-54-55EP z płytą główną LA-H501P nie reaguje na przycisk.
Po podłączeniu do zasilacza brak na cewce PL301 napięcia.
Na PL501 jest 5v

Rezystancja na cewkach
Pl301 16.77kohm
Pl501 53kohm
Plw1 113.6ohm
Plv2 i PLv 3 0.4ohm uszkodzona karta graficzna?
PLM1 269.8ohm
Pl1101 40.8ohm
Plg1 5ohm
Plz1-4 2.3ohm
Plg1 13.9ohm

Gdy robię próbę zwarciowa na cewce pl301 grzeje się pch uh1, czyli jest uszkodzony ?
Robiąc próbę zwarciowa na plv2 i plv3 grzeje się chip karty graficznej, czyli jest uszkodzony ?

Re: AN515-54-55EP brak 3.3v brak reakcji


by Google Adsense [BOT] 7 November 2025, 12:52

#2 Re: AN515-54-55EP brak 3.3v brak reakcji


by Vogelek23 7 November 2025, 13:54
przemekzn wrote:Gdy robię próbę zwarciowa na cewce pl301
Robisz próbę zwarciową przy 16kΩ do masy na cewce PL301 i grzeje się PCH? Coś tu jest ewidentnie źle. Może masz na myśli rezystancję do masy 16Ω? Przy 16kΩ do masy prąd nie powinien przekroczyć 200µA, co daje ok. 65µW mocy traconej - żaden komponent, a już zwłaszcza rdzeń PCH, nie zrobiłby się nawet lekko ciepły w takich warunkach.

przemekzn wrote:Plv2 i PLv 3 0.4ohm uszkodzona karta graficzna?
Nie. Taka rezystancja na zasilaniu GPU to norma.

#3 Re: AN515-54-55EP brak 3.3v brak reakcji


by przemekzn 7 November 2025, 14:17
Tak rezystancja na cewce wynosi 16kohm i chciałem zrobić próbę zwarciowa bo nie pojawia się 3.3v i zaczyna się grzać pch, myślałem że pokaże jakich kondensator...

#4 Re: AN515-54-55EP brak 3.3v brak reakcji


by Vogelek23 7 November 2025, 14:33
Rozlutuj zworkę PJ302 i sprawdź, czy po podłączeniu zasilania na cewce PL301 pojawi się 3,3V. Jeśli tak, to odłącz zasilanie, odczekaj 1-2 minuty i zmierz rezystancję do masy na obu padach rozlutowanej zworki PJ302.

#5 Re: AN515-54-55EP brak 3.3v brak reakcji


by przemekzn 7 November 2025, 14:39
Niestety nie pojawiło się napięcie na cewce

Re: AN515-54-55EP brak 3.3v brak reakcji


by Google Adsense [BOT] 7 November 2025, 16:56

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.