• Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)

Regole del forum:Clicca per leggere le regole del forum

  1. Il titolo dell'argomento deve contenere: marca e modello completo del dispositivo e la breve descrizione del problema.
  2. Il messaggio di argomento dovrebbe contenere: un identificatore PCB (in caso di riparazioni hardware), descrizione estesa del problema, cosa è stato controllato/sostituito/misurato, eventuali conclusioni e la domanda. Se non riesci a individuare un identificatore PCB, leggi QUESTO ARGOMENTO. Se non riesci ancora a individuare un identificatore PCB, invia foto chiare di entrambi i lati della scheda madre; è necessario rimuovere qualsiasi pellicola o altri elementi che potrebbero coprire questo identificatore.
  3. Prima di pubblicare un nuovo argomento, leggere tutti gli argomenti nel subforum CORSI e fare una diagnosi preliminare basata sul contenuto di questi corsi.
  4. È VIETATO caricare diagrami completi, file BIOS / firmware o qualsiasi altro tipo di documentazione (o collegarsi a siti Web con tali file). Puoi caricare solo una piccola parte della documentazione o collegarti al file del BIOS nel subforum BIOS FILE NON VERIFICATI. Non è consentito caricare più di una pagina completa di istruzioni/diagrami per singolo argomento. Il file che carichi non deve contenere filigrane, contrassegni "Riservati", link o indirizzi email e non può essere protetto da password.
  5. È consentito descrivere un solo dispositivo difettoso per singolo argomento - dovresti sempre aprire un nuovo argomento per ogni dispositivo successivo.
  6. La richiesta degli diagrami completi, dei file BoardView, dei file BIOS o di qualsiasi altro tipo di documentazione NON È CONSENTITA in questo subforum. Se hai bisogno di chiedere uno di questi, dovresti aprire un nuovo argomento nel subforum DOCUMENTAZIONE E RICHIESTA BIOS/EFI.

#1 Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 12 dicembre 2020, 11:43
Goodmorning everyone. This laptop enters the laboratory completely off, no LEDs, does not go into power on, no trace of oxidation and no absorption. Checking Q6002 I find the voltage of 19v on pins 5,6,7,8 but on pins 1,2,3 0v. Pin 4 0.37V.
After the mosfet I have not found low resistance. Checking u6000 I find these voltages:

pin 1 0v
pin 2 0v
pin 3 19v
pin 4 5,4v
pin 5 0v
pin 6 0,13v
pin 7 5,3v
pin 8 0v
pin 9 0v
pin 10 5,3v
pin 11 0v
pin 12 0v
pin 13 0v
pin 14 0,37v
pin 15 0v
pin 16 0v
pin 17 0v
pin 18 0v
pin 19 0,52v
pin 20 5,4
pin 21 4v
pin 22 5,4v
pin 23 0v
pin 24 0v

Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da Google Adsense [BOT] 12 dicembre 2020, 11:43

#2 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da matic 12 dicembre 2020, 13:31
Hello!

Measure the voltages to ground on both pins of resistor R6012.
Immagine

#3 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 12 dicembre 2020, 13:48
Hi Matic
Immagine

#4 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da matic 12 dicembre 2020, 14:10
Check the resistor R6012 (it should be 453kΩ).
Measure the resistance to ground on pin 19 of charger chip U6000.

#5 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 12 dicembre 2020, 15:46
Check the resistor R6012 (it should be 453kΩ)

10Kohm
Measure the resistance to ground on pin 19 of charger chip U6000

4Kohm

#6 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da matic 12 dicembre 2020, 16:22
Remove the charger chip U6000 and diode D6005 from the board.
Measure the voltage to ground on pin 19 of charger chip U6000 in this case.

#8 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 14 dicembre 2020, 10:57
Remove the charger chip U6000 and diode D6005 from the board.
Measure the voltage to ground on pin 19 of charger chip U6000 in this case.

pin 19 pad 4,18Kohm
Check R6012 = 45.3K, R6013 = 4.3k.

Hi machine, measured after removed U6000:
R6012 45,26 Kohm
r6013 4,32 Kohm

#9 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da matic 14 dicembre 2020, 11:02
robgerr ha scritto:
matic ha scritto:Remove the charger chip U6000 and diode D6005 from the board.
Measure the voltage to ground on pin 19 of charger chip U6000 in this case.
pin 19 pad 4,18Kohm
I asked about the voltage, not resistance measurement.

#10 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 14 dicembre 2020, 11:11
Sorry Matic, 0,52V

#11 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da matic 14 dicembre 2020, 11:14
robgerr ha scritto:Sorry Matic, 0,52V
Also remove the diode D6000 from the board and remeasure this voltage.

#12 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 14 dicembre 2020, 11:18
Also remove the diode D6000 from the board and remeasure this voltage

1,70V

#13 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da matic 14 dicembre 2020, 11:25
Solder all components back to the board, except the diode D6000. Check, if 19V is present on resistor R6020 in this case.

#14 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 14 dicembre 2020, 12:34
Solder all components back to the board, except the diode D6000. Check, if 19V is present on resistor R6020 in this case.

I re-soldered all the components except D6000, when I connected the power supply, the short led turned on and I unplugged immediately. Q6002 went short.
I removed R6020 and found a resistance of 30ohm to ground in one of the two pads. I injected a voltage of 1V and it started to heat up C6631. Removed from pbc, short gone. Re-soldered a new Q6002 and re-soldered R6020, now I am 19V. I tried to give the power on and the car starts quietly

#15 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)  [RISOLTO]


da matic 14 dicembre 2020, 12:38
Solder the diode D6000 back to the place and check, if the machine works.

#16 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 14 dicembre 2020, 12:48
Solder the diode D6000 back to the place and check, if the machine works.

Resoldered D6000 and machine power on perfectly.

#18 Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da robgerr 14 dicembre 2020, 18:22
Does the image appear?

Yes

Re: Toshiba L650-1MM no led, no power on (main 6050A2332301-MB-A02)


da Google Adsense [BOT] 14 dicembre 2020, 18:22

Chi c’è in linea

Visitano il forum: Nessuno e 2 ospiti

_______________________________
Tutti i diritti riservati. È severamente vietata la copia non autorizzata del contenuto di questo sito Web o di qualsiasi sua parte.
Eventuali marchi, nomi di società, prodotti o servizi pubblicati su questo sito Web appartengono ai legittimi proprietari, sono protetti da copyright e utilizzati solo a scopo informativo.