• PS3 i problemy z napędem

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 PS3 i problemy z napędem


by marioj77 2 August 2012, 09:59
Konsola trafiła z objawem brak napędu. Płytka elektroniki z oznaczeniem BMD-003.
Po reballingu układu CXD5065GB konsola chodziła 2 dni i z powrotem to samo.
Po podstawieniu układu z drugiej płytki (oznaczona BMD-002) konsola nie widzi napędu i nie można nawet wysunąć płyty.
Zakupiłem płytkę BMD-003 na logictoys.co.uk , niestety jest to samo, konsola nie widzi napędu ani nie chce wysunąć płyty.
Co muszę jeszcze zrobić żeby to zadziałało?

Re: PS3 i problemy z napędem


by Google Adsense [BOT] 2 August 2012, 09:59

#2 Re: PS3 i problemy z napędem


by marioj77 8 August 2012, 10:09
Nikt zupełnie nikt nie zna się na PS3? A może fachowcy są na wakacjach?

#3 Re: PS3 i problemy z napędem


by daner0 8 August 2012, 10:17
Z tego co wiem w tym układzie jest zapisany klucz zgodny tylko z daną płytą główną więc wymiana tego układu nie wchodzi w grę.

#5 Re: PS3 i problemy z napędem


by spidol 31 August 2012, 00:15
Witam .Wszystko jak na zdjęciu .
Image

#6 Re: PS3 i problemy z napędem


by marioj77 9 September 2012, 15:44
Przełożyłem eproma i układ Spansion (czyli oba oznaczone na obrazku), niestety napęd jest całkowicie martwy - nie wysuwa płyty, nie przyjmuje płyty, nie zakręci się nawet w momencie włączenia konsoli. Oczywiście konsola również go nie widzi.

#7 Re: PS3 i problemy z napędem


by marioj77 21 September 2012, 20:19
Przełożyłem do pierwszej płytki główny układ + eprom + spansion i układ ożył. Temat zamykam.

Re: PS3 i problemy z napędem


by Google Adsense [BOT] 21 September 2012, 20:19

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.