• Prośba o identyfikację elementu [Zotac GTX 1060 6GB]

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Prośba o identyfikację elementu [Zotac GTX 1060 6GB]


by lgolebio 12 June 2025, 14:35
Dzień dobry
Karta po "przejechaniu" śrubokrętem po tylnej ściance. Jeden z rezystorów był luźny (oznaczony nr 1 o wartości 10kohm) i został przylutowany. Ewidentnie brak drugiego, po lewej stronie. Prośba o pomoc jakiej wartości jest to rezystor.

Image

Image

Image

Re: Prośba o identyfikację elementu [Zotac GTX 1060 6GB]


by Google Adsense [BOT] 12 June 2025, 14:35

#2 Re: Prośba o identyfikację elementu [Zotac GTX 1060 6GB]


by matic 12 June 2025, 22:21
Hello!

Measure the value of the resistor marked in blue. The missing resistor has the same value as the marked one.
The value is usually in the range between 22-100Ω.
Image

By the way, there are more missing components:
Image
Inspect the entire board thoroughly, if there are any more.

#3 Re: Prośba o identyfikację elementu [Zotac GTX 1060 6GB]


by lgolebio 13 June 2025, 08:44
Oh my ! .... Totally missed that. Q11 looks like transistor. I have no idea what that might be. The second component is for sure a capacitor.

#4 Re: Prośba o identyfikację elementu [Zotac GTX 1060 6GB]  [SOLVED]


by matic 13 June 2025, 11:19
Use a continuity tester to check if pin 3 of Q11 is connected to ground. If so, this component is most likely transistor BSS138.
Image

#5 Re: Prośba o identyfikację elementu [Zotac GTX 1060 6GB]


by lgolebio 13 June 2025, 12:22
Yes, pin 3 is connected to GND. Looking for that transistor and I'll let you know if it works.

Re: Prośba o identyfikację elementu [Zotac GTX 1060 6GB]


by Google Adsense [BOT] 13 June 2025, 12:22

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.