• HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage

Danes je 30 Januar 2026, 11:02

 [REŠENO] HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage

 Pravila foruma: Klikni tukaj za prikaz pravil na forumu

  1. Naslov teme mora vsebovati: proizvajalca naprave, poln model in kratek opis okvare.
  2. Sporočilo teme mora vsebovati: oznako tiskanega vezja (v primeru popravil strojne opreme), razširjen opis okvare, kaj je bilo preverjeno, zamenjano in/ali izmerjeno, sklep in vprašanje. Če ne morete najti oznake tiskanega vezja, morate prebrati TO TEMO. Če še vedno ne najdete oznake, prosim objavite kakovostne fotografije obeh strani matične plošče - potrebno je odstraniti vse folije in module, ki bi lahko zakrivali te oznake.
  3. Pred objavo nove teme, preberite vse teme v podforumu USPOSABLJANJA, in naredite predhodno diagnostiko na podlagi vsebine teh usposabljanj.
  4. Nalaganje celotnih navodil/shem, BIOS / firmware datotek, ali objavljanje povezav, ki vodijo do drugih spletnih strani s takšnimi datotekami, je SROGO PREPOVEDANO. Lahko objavite le majhen del navodil/shem, ali povezavo na BIOS datoteko v podforumu NEVERIFICIRANE DATOTEKE BIOS/EFI. V eni temi ne smete objaviti več kot eno stran navodil/shem. Datoteka ne sme vsebovati vidnih žigov "zaupno",, e-poštnih naslovov ipd.
  5. V eni temi lahko opišete SAMO eno napravo. Za vsako drugo okvarjeno napravo morate odpreti novo temo.
  6. Zahteve za sheme, boardview, fotografije matičnih plošč, datoteke BIOS-a ali servisne priročnike za storitve NISO DOVOLJENE. Če želite vprašati za katero koli od teh, odprite novo temo v podforumu ZAHTEVA ZA DOKUMENTACIJO & DATOTEKO BIOS/EFI.

#1 HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage

Napisal/-a MendUsThis • 21 Januar 2026, 15:31
Hello,

I am in the process of attempting to replace the USB C controller on this laptop, after a failed attempt by the previous owner. The controller (Texas TPS65992DAD) has become welded to the board, so have had to use the Dremel on it.
I also need to replace a damaged copper pad that the suppressor diode was once attached to, but have noticed something odd when looking through the microscope. In the photo's attached, there appear to be two resistors (Yellow arrow) that have become fused together. I would like to replace them if anyone knows what value the should be?
Also, there is a line running from the two resistors to the missing diode pad (Red arrow). I think this is just some damage to the masking that happens to look like there used to be a copper trace there, but thought I would get your opinions.

Motherboard markings are as follows:

TIBERIUS 8L EM370
203036-1
448.0MK05.0011

Thank you.

Slika
Slika

Re: HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage

Napisal/-a Google Adsense [BOT] • 21 Januar 2026, 15:31

#2 Re: HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage  [REŠENO] 

Napisal/-a matic • 21 Januar 2026, 17:29
MendUsThis napisal/-a:there appear to be two resistors (Yellow arrow) that have become fused together.
Hello!
It's just a resistor array (resistor network). There are two resistors integrated into one housing.
As long as this resistor is not mechanically damaged, there is nothing wrong here.
Datasheet attached.
Slika

MendUsThis napisal/-a:Also, there is a line running from the two resistors to the missing diode pad (Red arrow). I think this is just some damage to the masking that happens to look like there used to be a copper trace there
Yes, exactly, it's just a scratch on the solder mask, there is no copper trace. You can protect this area with some UV curable solder mask.



Za ogled datotek, priloženih tej objavi, morate biti prijavljeni.

#3 Re: HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage

Napisal/-a MendUsThis • 21 Januar 2026, 19:23
Thank you matic.

Re: HP Envy 17-ch0500sa (4J977EA) - PCB and Component Damage

Napisal/-a Google Adsense [BOT] • 21 Januar 2026, 19:23
Podobne Teme
  HP Envy 17-ch0500sa (4J977EA) - Component identification  [REŠENO]
Schemat Asus Vivobook S 14 Flip TP3402ZA NB5915 PCB MB V5 TP3402 MB PCB
Quanta X38C, Rev: G, DAX38CMBAG0 component identification
  MSI GE66 Raider 10UH - Component identification  [REŠENO]
PS4 PCB SAC-001 identyfikacja elementów
  XBOX Series X Power Supply Model 1920 Liteon PA-1321-06M1 component identification  [REŠENO]

Kdo je na strani

Po forumu brska: Baidu [Spider] in 3 gostov

_______________________________
Vse pravice pridržane. Nepooblaščeno kopiranje vsebine te spletne strani ali njenega dela je strogo prepovedano.
Vse blagovne znamke, izdelki ali storitve, objavljene na tej spletni strani, pripadajo njihovim zakonitim lastnikom, so avtorsko zaščitene in se uporabljajo samo v informativne namene.