• Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Danes je 30 Januar 2026, 11:02

Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

 Pravila foruma: Klikni tukaj za prikaz pravil na forumu

  1. Naslov teme mora vsebovati: proizvajalca naprave, poln model in kratek opis okvare.
  2. Sporočilo teme mora vsebovati: oznako tiskanega vezja (v primeru popravil strojne opreme), razširjen opis okvare, kaj je bilo preverjeno, zamenjano in/ali izmerjeno, sklep in vprašanje. Če ne morete najti oznake tiskanega vezja, morate prebrati TO TEMO. Če še vedno ne najdete oznake, prosim objavite kakovostne fotografije obeh strani matične plošče - potrebno je odstraniti vse folije in module, ki bi lahko zakrivali te oznake.
  3. Pred objavo nove teme, preberite vse teme v podforumu USPOSABLJANJA, in naredite predhodno diagnostiko na podlagi vsebine teh usposabljanj.
  4. Nalaganje celotnih navodil/shem, BIOS / firmware datotek, ali objavljanje povezav, ki vodijo do drugih spletnih strani s takšnimi datotekami, je SROGO PREPOVEDANO. Lahko objavite le majhen del navodil/shem, ali povezavo na BIOS datoteko v podforumu NEVERIFICIRANE DATOTEKE BIOS/EFI. V eni temi ne smete objaviti več kot eno stran navodil/shem. Datoteka ne sme vsebovati vidnih žigov "zaupno",, e-poštnih naslovov ipd.
  5. V eni temi lahko opišete SAMO eno napravo. Za vsako drugo okvarjeno napravo morate odpreti novo temo.
  6. Zahteve za sheme, boardview, fotografije matičnih plošč, datoteke BIOS-a ali servisne priročnike za storitve NISO DOVOLJENE. Če želite vprašati za katero koli od teh, odprite novo temo v podforumu ZAHTEVA ZA DOKUMENTACIJO & DATOTEKO BIOS/EFI.

#1 Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 24 December 2025, 01:40
This laptop doesn’t charge the battery with his PSU 65W USB C and doesn’t power on with PSU connected
No shorted components or damaged

Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a Google Adsense [BOT] • 24 December 2025, 01:40

#2 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 25 December 2025, 21:45
Hello!

Connect the power supply to the board via a USB Type-C power meter and specify the voltage and current displayed on the meter.
(picture source: ubuy.com):
Slika

#3 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 25 December 2025, 23:24
20V
0,005A

#4 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 27 December 2025, 14:41
Measure the voltages to ground on any pin of resistors PR200, PR211 with the power supply connected only (without the battery).

#5 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 27 December 2025, 16:17
If you mean pin 1-4
PR200 = 20V
PR 211= 0,1V

#6 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 27 December 2025, 17:41
Measure the voltages to ground on pins 1, 4, 8, 12, 14, 15, 16, 17, 18, 19, 21, 22, 24, 25 of charger chip PU200 with the power supply connected only (without the battery).

#7 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 28 December 2025, 01:00
1= 0,1V
4=0,8V
8= 1V
12=0V
14=20V
15=20V
16=20V
17=0,5V
18=1V
19=3,68V
21=0,35V
22=0,35V
24=0V
25=0V

Sorry after measuring voltages I checked other components and I found the resistor and diode damaged
I’m going to replace them

Slika


After replacing resistor and diode damaged PD 201 blows again.

PD201 pin 2= 20V (blowed)
PD202 pin 2= 0V
PR208 pin 2= 250 ohm (maybe to low)?
PR208 pin 1= 10 M ohm

#8 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a Vogelek23 • 29 December 2025, 10:28
valieromarco napisal/-a:PR208 pin 2= 250 ohm (maybe to low)?
Yes, way too low. Remove PC227 and remeasure this resistance to ground. If still low, replace PU200 and PR208 (2Ω). If it goes high after removing PC227, replace PC227 (1uF/25V, 0402 case).

#9 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 29 December 2025, 14:10
Ok
PC227 was damaged
After replacing I got 20V on PR208 and also on pin 17 of PU 200
But notebook doesn’t power on now even with battery only
:frustry: :frustry:

#10 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 29 December 2025, 14:42
Remeasure the voltages suggested in post #6 and also remeasure the voltage to ground on any pin of resistor PR211 with the power supply connected only.

#11 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 29 December 2025, 17:06
PR211= 8,3V

1=8,3V
4=7,3V
8=5V
12=0V
14=20V
15=20V
16=20V
17=19,3V
18=5,1V
19=3,68V
21=0V
22=0V
24=0V
25=0V

I checked again PU200 and now some voltages have changed value.

Like PR211=1,6V

1=8,3V
4=8,7V
8=5,1V
12=8,6V LAST MEASURE
14=20V
15=20V
16=18,7V
17=19,6V
18=5,1V
19=3,8V
21=2V
22=2V
24=2,9V
25=0V

#12 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 29 December 2025, 17:32
Now you have given two different measurements. Which ones are correct???

#13 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 29 December 2025, 17:41
Now the correct measurement is the last one.
Situation has changed when I measured the the last pin and to confirm all voltages I checked it again from 1 pin and I noticed different measures

#14 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 29 December 2025, 17:52
Measure the resistances to ground on pins 8, 18 of charger chip PU200.
If both resistances are high (in the kΩ range or greater), replace the chip PU200.

#15 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 30 December 2025, 00:56
I replaced PU 200 no power on but I got a new measurement.
You can see the message #11
I changed old measure with last correct voltages and are marked as “LAST MEASURE”

I have something wrong:
PL 401 = 3,3V should be 5V
PL 250 = 3,66V
PL 702 = 0V

I removed PL 401 and on PU400 side I have 5V so there is something wrong on other side.

#16 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 30 December 2025, 19:16
Check the resistor PR206 (2Ω).

valieromarco napisal/-a:I have something wrong:
PL 401 = 3,3V should be 5V
This is more than obvious, as the main power rail "B+" voltage is way too low:
valieromarco napisal/-a:Like PR211=1,6V


#17 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 31 December 2025, 00:36
Sorry PR 211 I forgot to change right measure 8,3V

PR206 was damaged (70 ohm) now voltage 20V both pin
But still remains 3,3V on PL401

#18 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 31 December 2025, 17:08
Measure the voltages to ground on pins 1, 3, 10, 12, 13, 15 of chip PU400 with the coil PL401 installed.

#19 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a valieromarco • 31 December 2025, 17:51
1=8,3V
3=3,53V
10=6,5V
12=0V
13=1,21V
15=3V

#20 Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a matic • 1 Januar 2026, 00:04
Open the jumper PJP400 and remeasure the voltage to ground on coil PL401.

Re: Dell XPS 9300 13” motherboard FDQ30 LA-H811P rev 1.0 works with battery only

Napisal/-a Google Adsense [BOT] • 1 Januar 2026, 00:04
Podobne Teme
  ASUS FX504G motherboard DABKLGMB8D0 REV: D battery not charging  [REŠENO]
Lenovo Z510 motherboard ailza NM-A181 Rev 1.0 problem with battery
  Lenovo IDEAPAD 3IML05 Motherboard GS452/GS552/GS572 NM-C781 NO BATTERY CHARGING  [REŠENO]
  DELL G15 model 5515 motherboard GDL5L LA-K454P REV 1 no display  [REŠENO]
Dell Precision XPS 15 7590 mb. EDP51/EDB51 LA-H331P Rev: 1.0 nie uruchamia się
msi modern 15A11M not works

Kdo je na strani

Po forumu brska: Baidu [Spider] in 3 gostov

_______________________________
Vse pravice pridržane. Nepooblaščeno kopiranje vsebine te spletne strani ali njenega dela je strogo prepovedano.
Vse blagovne znamke, izdelki ali storitve, objavljene na tej spletni strani, pripadajo njihovim zakonitim lastnikom, so avtorsko zaščitene in se uporabljajo samo v informativne namene.