• Lenovo T15 płyta NM-C931 zawiesza się przy uruchamieniu systemu windows

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Lenovo T15 płyta NM-C931 zawiesza się przy uruchamieniu systemu windows


by dggn 21 November 2025, 14:16
Bardzo bym prosił o pomoc w ustaleniu usterki z laptopem jak w temacie. Płyta NM-C931 z procesorem i7-10610U, 16GB RAM wlutowanu + pusty slot, dołożony modem lte. Laptop zawiesza się po uruchomieniu systemu windows lub też podczas uruchamiania. Zdarza się, że brak obrazu ale rzadko. Podmieniane były dyski i instalowane systemy na nowo. Dzieje się tak w każdej konfiguracji sama bateria, bateria + zasilacz, sam zasilacz
Z pomiarów

napięcia cewek
L5602 0V
PL301 5V
PL0201 13.12V
PL0401 5.3V
PL0501 3.3V
PL0901 0V
PL0902 0V
PL0904 0V
PL1002 0V
PL1102 0.7V
PL1201 1.2V
PL1301 1V
PL1501 0.8V
PL1502 0.8V
PL1601 1.3V

rezystancja cewek
L5602 0.86kΩ
PL301 120kΩ
PL0201 7MΩ
PL0501 4.4kΩ
PL0901 3.2Ω
PL0902 3.2Ω
PL0904 3.2Ω
PL0909 3.2Ω
PL1002 4.9Ω
PL1102 14.6Ω
PL1201 88Ω
PL1301 50Ω
PL1501 2.9Ω
PL1502 2.9Ω
PL1601 368Ω

Może miał ktoś podobny problem i pomoże w znalezieniu przyczyny ?

Re: Lenovo T15 płyta NM-C931 zawiesza się przy uruchamieniu systemu windows


by Google Adsense [BOT] 21 November 2025, 14:16

#2 Re: Lenovo T15 płyta NM-C931 zawiesza się przy uruchamieniu systemu windows


by matic 22 November 2025, 22:08
dggn wrote:PL0901 3.2Ω
Hello!
Is this measurement correct? Please, check it.

If the measurement is fine, remove this coil from the board and measure the resistances to ground on both pads on the place of this coil.

Re: Lenovo T15 płyta NM-C931 zawiesza się przy uruchamieniu systemu windows


by Google Adsense [BOT] 22 November 2025, 22:08

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.