• HP Pro One 440 G9 nieudana aktualizacja Bios

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP Pro One 440 G9 nieudana aktualizacja Bios


by kwinto10 16 November 2025, 12:20
Witam,
Płyta BOGGLE-MV-GBM
Komputer startuje z komunikatem Firmware Update in progress, zrobi jeszcze dwa restarty z tym komunikatem i dalej czarny ekran (płyta bez baterii CMOS). Żeby ponownie uruchomił się z komunikatem trzeba odłączyć zasilanie.
Na płycie są dwie identyczne kości flash jedna jest podpisana jako BIOS.
Wgrałem do tej kości bios z jednego forum, ale bez zmian nadal jest ten sam komunikat.
Dodam że komputer jest bez dysku, klient zabrał i zainstalował w innym komputerze.
Proszę o pomoc jak naprawić ten błąd.

Re: HP Pro One 440 G9 nieudana aktualizacja Bios


by Google Adsense [BOT] 16 November 2025, 12:20

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.