#1 Asus Gu605mi DA0NJUMBCF0 powers up but stays on Rog logo
przez Endofeden • 1 października 2025, 03:16
So it will stay powered on and it charges the battery but it does not go
past the Rog logo. I removed the motherboard and checked the inductors for
shorts and the +NVVDD_+1.3V inductors are reading a short to .9 and the
+VCCSA_+1.52V inductors are shorted to 17.8. What should I check next. At
first I was thinking this was a bios issue but because of the shorts I'm
thinking that's not the case. I inspected the board and I didn't find any
damaged components. Board is DA0NJUMBCF0 REV:F
past the Rog logo. I removed the motherboard and checked the inductors for
shorts and the +NVVDD_+1.3V inductors are reading a short to .9 and the
+VCCSA_+1.52V inductors are shorted to 17.8. What should I check next. At
first I was thinking this was a bios issue but because of the shorts I'm
thinking that's not the case. I inspected the board and I didn't find any
damaged components. Board is DA0NJUMBCF0 REV:F