• Fujitsu U757 brakujące elementy na płycie

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Fujitsu U757 brakujące elementy na płycie


by opty22 11 September 2025, 11:26
Witam,
Zwracam się z prośbą o pomoc, gdyż podczas wylutowywania mosfeta z płyty Fujitsu CP714760-Z3 uciekły mi 2 elementy z płyty, dokładnie nie wiem jakie, przed lutowaniem nie zrobiłem zdjęcia, ale był to raczej rezystor i chyba dioda.Na załączonym zdjęciu widać te puste miejsca.Gdyby ktoś zechciał mi pomóc i napisać o jakich parametrach mogą to być elementy byłoby super.Pozdrawiam
Image

Re: Fujitsu U757 brakujące elementy na płycie


by Google Adsense [BOT] 11 September 2025, 11:26

#2 Re: Fujitsu U757 brakujące elementy na płycie


by Vogelek23 11 September 2025, 13:04
Zamieść wyraźne zdjęcie zaznaczonego niżej obszaru.
Image

#4 Re: Fujitsu U757 brakujące elementy na płycie


by opty22 11 September 2025, 15:29
Zaznaczyłem na zdjęciu element który mi zaginął, nie wiem tylko co to jest i jakie powinien mieć parametry.Drugi element był chyba rezystorem ale nie jestem pewien, proszę o pomoc.

Image

#5 Re: Fujitsu U757 brakujące elementy na płycie


by matic 11 September 2025, 15:47
Complete the places as suggested by a colleague @carrneiro in post #3.
Diode marking 'A1' means the diode DA2J10100L.
Datasheet attached.



You have to be logged in to view the files attached to this post.

#6 Re: Fujitsu U757 brakujące elementy na płycie


by opty22 11 September 2025, 19:18
Dziękuję bardzo za wszystkie odpowiedzi, Pozdrawiam

Re: Fujitsu U757 brakujące elementy na płycie


by Google Adsense [BOT] 11 September 2025, 19:18

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.