• MSI GTX1070 brak obrazu

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 MSI GTX1070 brak obrazu


by spekter 5 June 2025, 20:57
Witam,
Mam na blacie leciwą już kartę od MSI, mianowiceie GTX 1070 Gaming X o oznaczeniu MS-V330
Karta ma wszystkie napięcia prawidłowe, rdzeń nagrzewa się do max 36st ale nie startują pamięci.
Karta nie jest wykrywana w systemie.
Jest ktoś w stanie pomóc w temacie ?
Dodam jeszcze że BIOS karty też już wgrałem świeży.

Re: MSI GTX1070 brak obrazu


by Google Adsense [BOT] 5 June 2025, 20:57

#2 Re: MSI GTX1070 brak obrazu


by Vogelek23 6 June 2025, 00:39
spekter wrote:rdzeń nagrzewa się do max 36st
Mierzone z radiatorem czy bez? Jakie napięcia do masy masz na cewkach: L1, L19, L20, L22, LB11, PL1 i PL9 podczas "pracy" karty?

#3 Re: MSI GTX1070 brak obrazu


by spekter 6 June 2025, 21:26
Pomiary bez radiatora.
L1 - 5,063v
L19- 12,32v
L20 - 12,31v
L22 - 1,844v
LB11 - 1,019v
PL1 - 0,883v
PL9 - 1,387v

#5 Re: MSI GTX1070 brak obrazu


by spekter 8 June 2025, 22:05
Reflow wykonany, różnica jest taka że karta wymusza czarny ekran ( daje sygnał) ale nadal nie jest widoczna w systemie. Temperatury bez zmian

#6 Re: MSI GTX1070 brak obrazu


by matic 9 June 2025, 20:08
spekter wrote:oznaczeniu MS-V330
What is the revision of the board?

#7 Re: MSI GTX1070 brak obrazu


by spekter 10 June 2025, 20:27
V330 ver: 6.0

#8 Re: MSI GTX1070 brak obrazu


by matic 11 June 2025, 13:56
- Measure the voltage to ground on pin 16 of chip I1.
- Measure the voltages to ground on pins 1, 4, 5 of chip U5.

#9 Re: MSI GTX1070 brak obrazu


by spekter 13 June 2025, 20:31
I1 pin 16 - 3,34V
U5 ( It is not present in this version )
pin 1,2 - 0V
pin 4 - 0.08V

#10 Re: MSI GTX1070 brak obrazu


by matic 14 June 2025, 20:12
Set your multimeter to the diode test mode and measure the voltage drop to ground on pad 1 on the place of chip U5 with the positive (red) probe connected to the ground.

#11 Re: MSI GTX1070 brak obrazu


by spekter 14 June 2025, 21:39
0,42V

#12 Re: MSI GTX1070 brak obrazu


by matic 15 June 2025, 11:41
Also measure the voltage drops to ground on points A, B with the negative (black) probe connected to the ground.
Image

#13 Re: MSI GTX1070 brak obrazu


by spekter 22 June 2025, 12:18
A small correction, I connected the card directly to the board and not to the riser (as before) and in the PCIe slot the card receives a voltage of 3.3V on U5 on pins 1, 2 and 4. It took a while due to lack of time.

#14 Re: MSI GTX1070 brak obrazu


by matic 24 June 2025, 15:09
- Is the graphics card still not detected in "Device manager"?
- How about the measurements suggested in post #12?

#15 Re: MSI GTX1070 brak obrazu


by spekter 25 June 2025, 21:18
The graphics card still not detect
The voltage on point A and B is this same - 0.5V

#16 Re: MSI GTX1070 brak obrazu


by matic 26 June 2025, 09:33
Use an oscilloscope to check if any data pulses appear on pin 1 of the VBIOS chip U3 immediately after turning on the card.

Re: MSI GTX1070 brak obrazu


by Google Adsense [BOT] 26 June 2025, 09:33

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.