• HP ZBook 17 G3 identyfikacja elementów.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP ZBook 17 G3 identyfikacja elementów.


by Santo0975 4 June 2025, 22:16
Witam,

Podczas szukania zwarcia na kondensatorze (zaznaczonym na zdjęciu na czerwono), przypadkowo usunąłem plecionką trzy elementy z płyty głównej LA-C391P Rev:1A. Były to dwa kondensatory 2,5 µF oraz rezystor 100 Ω, umieszczone przy układzie audio CX7501-11Z, w okolicach pinów 31, 35 i 36.

Nie mam dostępu do schematów ani pliku boardview. Na załączonym zdjęciu zaznaczyłem brakujące elementy na żółto, a miejsce zwarcia na czerwono.

Będę bardzo wdzięczny za pomoc lub informacje, które mogą pomóc w identyfikacji tych elementów.
Image

Re: HP ZBook 17 G3 identyfikacja elementów.


by Google Adsense [BOT] 4 June 2025, 22:16

#2 Re: HP ZBook 17 G3 identyfikacja elementów.


by Vogelek23 4 June 2025, 22:42
Wartości i lokalizacja elementów na obrazku poniżej.
Image

A tutaj schemat kodeka Conexant CX7501-11Z.
Image

#3 Re: HP ZBook 17 G3 identyfikacja elementów.


by Santo0975 5 June 2025, 09:14
Dziękuję za szybką odpowiedź! Mam jeszcze jedno pytanie:
Dlaczego na kondensatorze zaznaczonym na czerwono występuje zwarcie – pomiar pokazuje rezystancję 0,03 Ω?

#4 Re: HP ZBook 17 G3 identyfikacja elementów.


by Vogelek23 5 June 2025, 20:13
Jest wiele możliwych przyczyn - każdy element, podłączony do tej linii zasilania, może być potencjalnym "sprawcą" zwarcia. W takich przypadkach należy wykonać tzw. próbę zwarciową, która jest dokładnie opisana tutaj: post5699.html#p5699

Re: HP ZBook 17 G3 identyfikacja elementów.


by Google Adsense [BOT] 5 June 2025, 20:13

Who is online

Users browsing this forum: smetankin86 and 4 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.