• ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External

Forumsregeln:Die Forumsregeln lesen

  1. Der Titel des Themas sollte Folgendes enthalten: den Hersteller der Maschine, das vollständige Modell und die kurze Beschreibung des Fehlers.
  2. Die Themennachricht sollte enthalten: einen PCB-Markierungscode (im Falle von Hardware-Reparaturen), erweiterte Beschreibung des Fehlers, Was wurde überprüft/ersetzt/gemessen + Schlussfolgerungen und, die Frage. Wenn Sie keinen PCB-Markierungscode finden können, du solltest lesen DIESES THEMA. Wenn Sie immer noch keine PCB-Markierungscode finden können, laden Sie bitte ein sauberen Fotos von beiden Seiten des Motherboards - ist es erforderlich, alle Filme und Module zu entfernen, die möglicherweise diese Markierungen abdecken könnte.
  3. Bevor Sie ein neues Thema veröffentlichen, sollten Sie alle Themen im Unterforum AUSBILDUNGEN lesen und machen Sie eine vorläufige Diagnose basierend auf dem Inhalt dieser Ausbildungen.
  4. Das Hochladen vollständiger Anweisungen/Schaltpläne oder BIOS-Dateien / Firmware (oder das Verlinken auf andere Websites mit solchen Dateien) ist STRENG VERBOTEN. Sie können nur den kleinen Teil der Anweisung/Schaltplans oder den Link zur BIOS-Datei in UNVERIFIZIERTE BIOS-DATEIEN platzieren, der die Diagnose und Reparatur für den Themenautor vereinfacht. Sie können nicht mehr als eine vollständige Seite mit Anweisungen/Schaltplänen pro einzelnem Thema platzieren. Die Datei darf keine sichtbaren Wasserzeichen, "vertraulichen" Markierungen, E-Mail-Adressen usw. enthalten.
  5. Pro Thema darf nur eine fehlerhafte Maschine beschrieben werden. Für jede nächste Maschine sollten Sie ein neues Thema öffnen.
  6. Das Anfordern von Schaltplänen, Boardview, MB-Fotos, BIOS-Dateien oder Servicehandbüchern ist STRENG VERBOTEN. Wenn Sie irgendwelche von denen fragen wollen, sollten Sie ein neues Thema in DOKUMENTATION UND BIOS/EFI ANFRAGE Sub-Forum öffnen.

#1 ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 14 April 2025, 16:42
Hello

I have an ASUS TUF A16 laptop board number FA617-PMV-GBM / 6050A3460902-MB-A02. The problem is there is no display. The laptop will post, i can toggle the caps lock key on/off and the keyboard backlight is on, the fans are spinning, but there is no display on the internal screen or through the HDMI out to an external monitor. I have replaced the screen and still no change. I suspect it is probably a GPU or VRAM issue, but wanted to fully confirm if anybody can help, thank you.

I have taken resistance measurements of all coils in the picture.
Bild

Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von Google Adsense [BOT] 14 April 2025, 16:42

#2 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 18 April 2025, 09:57
KenM0560 hat geschrieben:6050A3460902-MB-A02
Hello!
Is this motherboard marking code correct?

Measure the power consumption (in mA) of the board, when the machine is turned on with and without RAM memory connected.

#3 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 18 April 2025, 18:32
There is also this code on the board "FA617-PMV-GBM"

After looking i can not find the right adapter tip for this laptop to connect to the lab power supply. I have nearly 30 tips and not the right one.

You can toggle the caps lock key on/off after several seconds after pressing the power button.

#4 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 29 April 2025, 10:11
Please check that you rewrite this number from the board correctly.
KenM0560 hat geschrieben:6050A3460902-MB-A02


#5 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 29 April 2025, 13:14
matic hat geschrieben:Please check that you rewrite this number from the board correctly.


Yes all looks good, cant see any other markings on the board.

Bild

#6 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 29 April 2025, 15:29
Please, post clear picture of marked area of the board:
Bild

#7 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 29 April 2025, 16:39
Sure thing.

Bild

#8 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 30 April 2025, 14:32
- Measure the voltages to ground on pins 1, 2, 3, 6, 9, 24, 29, 32, 33, 34, 42, 43, 55, 56, 57, 58 of chip U3052 with the internal matrix connected.

- Measure the voltages to ground on pins 16, 19, 49 of chip U3052 in the following cases:
a) Internal matrix connected.
b) Internal matrix disconnected.

#9 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 1 Mai 2025, 09:36
U3052 - With internal screen connected

1 = 3.4V
2 = 3.4V
3 = 1.2V
6 = 130mV
9 = 3.3V
24= 1.2V
29= 3.4V
32= 1.2V
33= 1.2V
34= 167mV
42= 1.2V
43= 1.2V
55= 1.2V
56= 1.2V
57= 400mV
58= 400mV

A) With internal screen connected
16= 0V
19= 0V
49= 0V

B) With internal screen disconnected
16= 0V
19= 0V
49= 0V

#10 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 2 Mai 2025, 08:39
matic hat geschrieben:Please, post clear picture of marked area of the board:
[ Obrazek ]
Please, post another picture of the same area from the other side of the board.

#11 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 2 Mai 2025, 12:08
matic hat geschrieben:Please, post another picture of the same area from the other side of the board.


Bild

#12 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 4 Mai 2025, 13:34
Measure the voltages to ground on pins 1, 2, 3, 7, 8, 10, 11, 26, 27, 28, 29, 30, 31, 32, 33, 34, 37, 40 of LVDS connector CN3000 with the internal matrix connected. Pin 1 is near the LAN port.

#13 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 5 Mai 2025, 08:57
CN3000 with screen connected

1 = 3.4V
2 = 0V
3 = 0V
7 = 0V
8 = 3.4V
10= 0V
11= 0V
26= 0V
27= 0V
28= 0V
29= 0V
30= 0V
31= 0V
32= 0V
33= 0V
34= 0V
37= 0V
40= 20V

#14 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 7 Mai 2025, 20:59
Set your multimeter to the diode test mode and measure the voltage drops to ground on pins 4, 5, 7, 8, 10, 11, 26, 27, 28, 29, 30, 31, 32, 33, 34, 37 of LVDS connector CN3000 with the positive (red) probe connected to the ground.
The measurements must be taken with the power supply and main battery disconnected from the board.

#15 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 8 Mai 2025, 14:35
CN3000 Diode mode readings, Screen disconnected

4 = .608
5 = .608
7 = .680
8 = .660
10= 1.360
11= 0.000
26= .695
27= .695
28= .596
29= .426
30= .424
31= .424
32= .424
33= OL
34= OL
37= OL

#16 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 11 Mai 2025, 17:35
Test the matrix in another laptop to make 100% sure it works. If the matrix is fine, check/replace the LVDS cable.

#17 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 11 Mai 2025, 20:27
Would it be sufficient to test the LVDS cable by checking continuity of each pin from the display connector CN3000 to the screen panel connector?

The original screen is N160JME-GE1 165Hz

I have a couple of spare 16" 40pin screens, would it be possible to test with one of these? The second one looks similar but has a different refresh rate
N161HCA-GA1 144Hz
N160JME-GTK 144Hz

#18 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von matic 11 Mai 2025, 21:54
KenM0560 hat geschrieben:Would it be sufficient to test the LVDS cable by checking continuity of each pin from the display connector CN3000 to the screen panel connector?
There is no 100% sure method to test the LVDS cable with a multimeter, but you can try.

KenM0560 hat geschrieben:N161HCA-GA1 144Hz
This screen is not suitable, as it has a different resolution.
KenM0560 hat geschrieben:N160JME-GTK 144Hz
This one should be fine.

#19 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 12 Mai 2025, 08:38
No change with screen N160JME-GTK

There are several pins from the connector CN3000 that dont have continuity with the screen connector but if it is not a 100% sure method to test, i have found a replacement cable to order, will most likely take the week to arrive.

Part 14005-04540000

#20 Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von KenM0560 20 Mai 2025, 20:56
I received the replacement display cable today, and after fitting it there is still no change.

No display, but the laptop can toggle the caps lock key and responds to the power button to turn off.

Re: ASUS TUF A16 (FA617-PMV-GBM) - POSTing but no display Internal or External


von Google Adsense [BOT] 20 Mai 2025, 20:56

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste

_______________________________
Alle Rechte vorbehalten. Das unerlaubte Kopieren des Inhalts dieser Website oder eines Teils davon ist strengstens untersagt.
Alle auf dieser Website veröffentlichten Marken, Markennamen, Produkte oder Dienstleistungen gehören ihren gesetzlichen Eigentümern, sind urheberrechtlich geschützt und werden nur zu Informationszwecken verwendet.