• HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#21 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by krisark 14 February 2024, 18:18
Matic masz jeszcze jakiś pomysł co do tego pacjenta.
Już wiemy, że to nie taśma LVDS ani matryca, bo na nowych komponentach taki sam objaw.
Jeżeli CPU źle się polutował to jest szansa, że nie będzie obrazu, a do systemu Windows laptop będzie się uruchamiał :shock: ?
Czy raczej GPU do podmiany?

Re: Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by Google Adsense [BOT] 14 February 2024, 18:18

#22 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by matic 15 February 2024, 13:17
Set your multimeter to the diode test mode and measure the voltage drops to ground on listed pns:
- On pin 1 of capacitors CC1, CC2, CC3, ..., CC16.
- On pin 1 of capacitors CC372, CC373, CC374, ..., CC387.
- On pin 1 of capacitors CG944, CG946, CG947, CG948, ..., CG969
- On pin 1 of capacitors CG2839, CG2840, CG2841, CG2842, CG2843, CG2844.

#23 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by krisark 15 February 2024, 22:08
Mam Boardview z płyty LA-H482P, więc bazuje na nim.
Set your multimeter to the diode test mode and measure the voltage drops to ground on listed pns:
- On pin 1 of capacitors CC1, CC2, CC3, ..., CC16 - 0,26V
Image
- On pin 1 of capacitors CC372, CC373, CC374, ..., CC387 - 0,25V
Image
- On pin 1 of capacitors CG944, CG946, CG947, CG948, ..., CG969 - 0,87V
Image
- On pin 1 of capacitors CG2839, CG2840, CG2841, CG2842, CG2843, CG2844 - 0,87V
Image

#24 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by krisark 19 February 2024, 16:36
Coś wywnioskowałeś z tych pomiarów, masz jakieś podejrzenie ?

#25 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by matic 19 February 2024, 17:28
- Measure the voltages to ground on pin 4 of chips UG105, UV2 (if they are present on your board).
- Measure the voltages to ground on pins 1, 3 of quartz YG1. It's best to measure it with an oscilloscope, if you don't have it, measure with a multimeter.

#26 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by krisark 19 February 2024, 21:25
Measure the voltages to ground on pin 4 of chips UG105 - 1,80V
Measure the voltages to ground on pin 4 of chips UV2 - 1,81V
Measure the voltages to ground on pins 1, 3 of quartz YG1:
pin 1 - 0,87V - oscyloskop - 1,04V do 1,34V (napięcie skacze)
pin 3 - 0,91V - oscyloskop - 1,24V do 1,68V (napięcie skacze)

#27 Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by krisark 21 February 2024, 13:27
Coś wywnioskowałeś z tych pomiarów, masz jakieś podejrzenie ?

Re: HP OMEN 17-cb0015nw, płyta LA-H492P - brak obrazu


by Google Adsense [BOT] 21 February 2024, 13:27

Who is online

Users browsing this forum: No registered users and 9 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.