Pravila foruma: Klikni tukaj za prikaz pravil na forumu
- Naslov teme mora vsebovati: proizvajalca naprave, poln model in kratek opis okvare.
- Sporočilo teme mora vsebovati: oznako tiskanega vezja (v primeru popravil strojne opreme), razširjen opis okvare, kaj je bilo preverjeno, zamenjano in/ali izmerjeno, sklep in vprašanje. Če ne morete najti oznake tiskanega vezja, morate prebrati TO TEMO. Če še vedno ne najdete oznake, prosim objavite kakovostne fotografije obeh strani matične plošče - potrebno je odstraniti vse folije in module, ki bi lahko zakrivali te oznake.
- Pred objavo nove teme, preberite vse teme v podforumu USPOSABLJANJA, in naredite predhodno diagnostiko na podlagi vsebine teh usposabljanj.
- Nalaganje celotnih navodil/shem, BIOS / firmware datotek, ali objavljanje povezav, ki vodijo do drugih spletnih strani s takšnimi datotekami, je SROGO PREPOVEDANO. Lahko objavite le majhen del navodil/shem, ali povezavo na BIOS datoteko v podforumu NEVERIFICIRANE DATOTEKE BIOS/EFI. V eni temi ne smete objaviti več kot eno stran navodil/shem. Datoteka ne sme vsebovati vidnih žigov "zaupno",, e-poštnih naslovov ipd.
- V eni temi lahko opišete SAMO eno napravo. Za vsako drugo okvarjeno napravo morate odpreti novo temo.
- Zahteve za sheme, boardview, fotografije matičnih plošč, datoteke BIOS-a ali servisne priročnike za storitve NISO DOVOLJENE. Če želite vprašati za katero koli od teh, odprite novo temo v podforumu ZAHTEVA ZA DOKUMENTACIJO & DATOTEKO BIOS/EFI.
Ta tema je označena kot ARHIVSKA. Odgovorite samo, če vaše sporočilo vsebuje rešitev (Pravila in Pogoji, 12.1).
Re: HP 840 G2 6050A2637901-MB-A02 - Jedno mrugnięcie diody power
Napisal/-a Google Adsense [BOT] • 4 Januar 2023, 15:20
#7 Re: HP 840 G2 6050A2637901-MB-A02 - Jedno mrugnięcie diody power
Napisal/-a bar007 • 7 Januar 2023, 13:01
matic napisal/-a:How about the LED near the DC socket? Does it lit or not?
Does the battery charges?
The LEDs near the power socket do not light up. I think the problem is with the power supply because when I measure the voltage on Q110, the voltage jumps between 19.5V to 17V, and it should be constant.
#8 Re: HP 840 G2 6050A2637901-MB-A02 - Jedno mrugnięcie diody power
Napisal/-a matic • 7 Januar 2023, 13:15
bar007 napisal/-a:when I measure the voltage on Q110, the voltage jumps between 19.5V to 17V, and it should be constant.You should missed something. Transistor Q110 has nothing to do with the power supply on this board.
Measure the voltages to ground on pins 1, 4, 8 of transistors Q6010, Q6011 with the power supply connected only (without battery). Check, if the voltages are constant.
#9 Re: HP 840 G2 6050A2637901-MB-A02 - Jedno mrugnięcie diody power
Napisal/-a bar007 • 10 Januar 2023, 10:00
matic napisal/-a:You should missed something. Transistor Q110 has nothing to do with the power supply on this board.
Measure the voltages to ground on pins 1, 4, 8 of transistors Q6010, Q6011 with the power supply connected only (without battery). Check, if the voltages are constant.
Q6010 pin 1 = 19,5V
Q6010 pin 4 = 6.05 V ~ 10V when the D9100 LED lights up, the voltage jumps to about 10V
Q6010 pin 8 = 19,5V ~ 17,3V when the D9100 diode lights up the voltage drops to about 17.3V
Q6011 pin1 = 19,5V ~ 17,3V when the D9100 diode lights up the voltage drops to about 17.3V
Q6011 pin4 = 25V ~ 23V when the D9100 diode lights up the voltage drops to about 23V
Q6011 pin8 = 19,5V ~ 17,3V when the D9100 diode lights up the voltage drops to about 17.3V
#10 Re: HP 840 G2 6050A2637901-MB-A02 - Jedno mrugnięcie diody power
Napisal/-a matic • 10 Januar 2023, 11:13
bar007 napisal/-a:Q6010 pin 1 = 6.05 V ~ 10V when the D9100 LED lights up, the voltage jumps to about 10VThese measurements are strange. You most likely counted the pins of transistors wrongly.
Q6010 pin 4 = 19,5V
Q6010 pin 8 = 19,5V ~ 17,3V when the D9100 diode lights up the voltage drops to about 17.3V
Q6011 pin1 = 25V ~ 23V when the D9100 diode lights up the voltage drops to about 23V
Q6011 pin4 = 19,5V ~ 17,3V when the D9100 diode lights up the voltage drops to about 17.3V
Q6011 pin8 = 19,5V ~ 17,3V when the D9100 diode lights up the voltage drops to about 17.3V
Transistors pin count:
Ta tema je označena kot ARHIVSKA. Odgovorite samo, če vaše sporočilo vsebuje rešitev (Pravila in Pogoji, 12.1).
Kdo je na strani
Po forumu brska: 0 registriranih uporabnikov in 2 gostov
_______________________________Vse pravice pridržane. Nepooblaščeno kopiranje vsebine te spletne strani ali njenega dela je strogo prepovedano.
Vse blagovne znamke, izdelki ali storitve, objavljene na tej spletni strani, pripadajo njihovim zakonitim lastnikom, so avtorsko zaščitene in se uporabljajo samo v informativne namene.

