• Lenowo IdeaPad 310-15IKB NM-A981 - Laptop nie uruchamia się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Lenowo IdeaPad 310-15IKB NM-A981 - Laptop nie uruchamia się


by zipek 27 April 2022, 22:01
Cześć,
Laptop: Lenovo Ideapad 510-15IKB
Model: 80SV
Płyta główna NM-A981 Rev.1.0

Podczas transportu laptop upadł na ziemię.
Laptop nie uruchamia się. Nie reaguje na przycisk zasilania.
Po wykonaniu wstępnych pomiarów brak zwarcia na linii głównej.
PL302 - 50kΩ
PL402 - 41kΩ
PL500 - 75Ω
PL502 - 6KΩ
PL501 - 371Ω
PL1001 - 19.3Ω
PL1002 - 35.7Ω
PL1003 - 15Ω
PL801 - 12.5Ω
PL802 - 12.5Ω
PL702 - 8.6Ω

Sprawdziłem czy mosfety nie są zwarte i są ok.

Sprawdzałem czy układ chargera jest zasilany i zauważyłem jednak coś dziwnego a mianowicie przy podłączonym zasilaczu, pojawia się pełne napięcie 20V po czym od razu spada do 2V - 1V i znowu pojawia się pełne napięcie 20V, proces ten zachodzi w kółko.
Sprawdziłem zasilacz, podawał 20,20V - sprawny.
Sprawdzałem czy pojawia się napięcie na ACOK i w wskakiwało na zmianę 3v i 0V .

Domniemam ze charger działa a problem tkwi w skokach napięcia, co może być zapewne spowodowane zwartym jakimś elementem.
Proszę o jakąś porade/pomoc.

Pozdrawiam

Re: Lenowo IdeaPad 310-15IKB NM-A981 - Laptop nie uruchamia się


by Google Adsense [BOT] 27 April 2022, 22:01

#3 Re: Lenowo IdeaPad NM-A981 - Laptop nie uruchamia się


by zipek 28 April 2022, 16:51
Pomiar napięć na cewkach jest bardzo utrudniony, gdyż na każdej cewce pojawia się chwilowo napięcie i natychmiast spada do 0V, sytuacja identyczna jak na wejściu układu chargera gdzie pojawia się pełne napięcie a zaraz po tym spada do zera i tak w kółko.

#5 Re: Lenowo IdeaPad NM-A981 - Laptop nie uruchamia się


by zipek 29 April 2022, 16:49
Bez wciśniętego przycisku start napięcie na pinach:
1 - 20V i spada do 2V potem do 1V i 0V a następnie wskakuje pełne 20V i tak w pętli
4 - 26V i spada do 2V potem do 1V i 0V a następnie wskakuje pełne 20V i tak w pętli
8 - 20V i spada do 2V potem do 1V i 0V a następnie wskakuje pełne 20V i tak w pętli

#7 Re: Lenowo IdeaPad NM-A981 - Laptop nie uruchamia się


by zipek 30 April 2022, 16:28
PU401:
Pin 1: 3V i spadek do 1V - 0V i ponownie wskakuje 3V i spada.
Pin 9: 0,7V i spadek do 0V i ponownie wskakuje 0,7V i spada.
Pin 11: 2,5V i spadek do 0V i ponownie wskakuje 2,5V i spada.
Pin 12: 3,3V i spadek do 0V i ponownie wskakuje 3,3V i spada.
Pin 16 i 17: 3,3V i spadek do 0V i ponownie wskakuje 3,3V i spada.

PU402:
Pin 1: 2,3V i spadek do 1V - 0V i ponownie wskakuje 2,3V i spada.
Pin 9: 0,5V i spadek do 0V i ponownie wskakuje 0,5V i spada.
Pin 11: 20V i spadek do 2,5V - 0V i ponownie wskakuje 20V i spada.
Pin 12: 3,3V i spadek do 1V - 0V i ponownie wskakuje 3,3V i spada.
Pin 15: 5V i spadek do 1V - 0V i ponownie wskakuje 5V i spada.
Pin 17: 3,3 i spadek do 1V - 0V i ponownie wskakuje 3,3V i spada.

This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 5 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.