• Abit BE6 awaria po wpięciu karty graficznej identyfikacja elementów

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Abit BE6 awaria po wpięciu karty graficznej identyfikacja elementów


by Trante011 24 March 2021, 21:47
Po wygrzaniu rdzenia karty graficznej wpiętej do slotu AGP i włączeniu zasilania poleciał dym w okolicach układu CS 51313. Jeden z elementów których szukam był zwęglony a poniżej pod elektrolitem jest przerwana ścieżka. Podczas wymiany zgubiłem część elementów zanim zdążyłem zmierzyć, jeden z nich ma 10nF, szukam pozostałych dwóch. Czy jest możliwość odczytania ich wartości ze schematu w.w układu (w załączniku) ?

Ścieżki po drugiej stronie laminatu od układu biegną do zasilania portu AGP.

Image
Image
Image
Image



You have to be logged in to view the files attached to this post.

Re: Abit BE6 awaria po wpięciu karty graficznej identyfikacja elementów


by Google Adsense [BOT] 24 March 2021, 21:47

#2 Re: Abit BE6 awaria po wpięciu karty graficznej identyfikacja elementów


by matic 24 March 2021, 23:09
Hello!

According to the chip datasheet the missing components should be as follows:
C63 -> 100nF, package 0603
C64 -> 10nF, package 0603
C65 -> 680pF, package 0603

Re: Abit BE6 awaria po wpięciu karty graficznej identyfikacja elementów


by Google Adsense [BOT] 24 March 2021, 23:09
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.