• Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP

Forumsregeln:Die Forumsregeln lesen

  1. Der Thementitel sollte die kurze Beschreibung des Problems enthalten
  2. Die Themenmeldung sollte die ausführliche Problembeschreibung und auch die Frage enthalten.
  3. Es ist nicht gestattet, Anhänge mit der vollständigen Dokumentation oder BIOS-Datei zu veröffentlichen oder auf Websites von Drittanbietern zu verlinken, die solche Dateien hosten. Es darf nur der kleine Teil der Dokumentation (bis zu einer Seite pro Beitrag) gepostet werden.
  4. Sie können pro Thema nur ein Problem beschreiben. Für jedes andere Problem sollten Sie ein neues Thema eröffnen.
  5. Es ist strengstens untersagt, nach Dokumentationen oder BIOS-Dateien zu fragen. Für solche Anfragen nutzen Sie bitte das DOKUMENTATION UND BIOS/EFI ANFRAGE Unterforum.

#1 Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP


von dir 5 März 2021, 14:23
Mam problem z zaprogramowaniem układu KBC IT8986E/BX w Lenovo 320-15IAP na VertyanovJIG 3,9.
Używam kabla 30pin typ A ale może dla tej płyty powinien być 32pin??

Re: Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP


von Google Adsense [BOT] 5 März 2021, 14:23

#2 Re: Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP


von matic 5 März 2021, 20:51
Hello!

Please, specify the motherboard marking code.

#3 Re: Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP


von dir 6 März 2021, 10:40
matic hat geschrieben:Witaj!

Proszę podać kod oznaczający płytę główną


NM-B301

#4 Re: Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP  [GELÖST]


von matic 6 März 2021, 13:27
dir hat geschrieben:Używam kabla 30pin typ A ale może dla tej płyty powinien być 32pin??
It is enough to use a 30-pin cable, because the pins 31, 32 of the keyboard connector are not needed for programming the KBC chip on this board.
But be aware, because in this case the cable on Vertyanov programmer should be shifted by two pins in right. So, it is need to connect the 30-pin FFC cable to the pins 3 - 32 of Vertyanov programmer (pin 1 of FFC cable should be connected to pin 3 on Vertyanov).

Don't forget to uncheck the box "1 pin JIG connected to 1 pin kb_conn MB", because the pin 1 of motherboard is connected to pin 32 of Vertyanov programmer.

#5 Re: Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP


von dir 6 März 2021, 14:46
matic hat geschrieben:Nie zapomnij odznaczyć pola "1 pin JIG podłączony do 1 pin kb_conn MB", ponieważ pin 1 płyty głównej jest połączony z pinem 32 programatora Vertyanov.


Tak właśnie ta opcja jest nie aktywna, wyszarzała. (w podobny sposób programowałem płytę NM-A841 i tam pole "1 pin JIG podłączony do 1 pin kb_conn MB" dało się zmienić na "1 pin JIG -> to end pin MB KB_connector")

Bild

Re: Problem z zaprogramowaniem układu KBC w Lenovo 320-15IAP


von Google Adsense [BOT] 6 März 2021, 14:46

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast

_______________________________
Alle Rechte vorbehalten. Das unerlaubte Kopieren des Inhalts dieser Website oder eines Teils davon ist strengstens untersagt.
Alle auf dieser Website veröffentlichten Marken, Markennamen, Produkte oder Dienstleistungen gehören ihren gesetzlichen Eigentümern, sind urheberrechtlich geschützt und werden nur zu Informationszwecken verwendet.