• ADP-240AR prosba o identyfikacje elementu

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 ADP-240AR prosba o identyfikacje elementu


by adikomp 5 July 2019, 11:34
Witam
dostałem do naprawy zasilacz z konsoli PS4 model ADP-240AR niestety ktoś już wsadził tam swoje raczki i niestety brakuje elementu ZD31,
zdjęcie w załączniku , miejsce elementu zaznaczone na czerwono.
Jeśli któryś z szanownych forumowiczów byłby tak miły i zidentyfikował co tam może siedzieć to byłbym wdzięczny

pozdrawiam

Image

Re: ADP-240AR prosba o identyfikacje elementu


by Google Adsense [BOT] 5 July 2019, 11:34

#2 Re: ADP-240AR prosba o identyfikacje elementu


by rager24 5 July 2019, 14:46
Z Twojego zdjęcia i zdjęcia w tym poście: https://www.elvikom.pl/post172452.html#p172452 można wywnioskować, że jest to najprawdopodobniej taka sama dioda zenera co ZD32

#3 Re: ADP-240AR prosba o identyfikacje elementu


by adikomp 8 July 2019, 11:40
Witam
to ze jest to dioda zenera wynika z opisu , może źle się wyraziłem albo ktoś mnie źle zrozumiał
chodziło mi o identyfikację elementu nie typu czyli jaki to MODEL diody zenera
pozdrawiam

#4 Re: ADP-240AR prosba o identyfikacje elementu


by Vogelek23 8 July 2019, 12:33
Co tam za sterownik jest w obudowie SO16 (nie widać dokładnie oznaczeń)? I z którą nogą tego układu jest połączona anoda ZD31?

#5 Re: ADP-240AR prosba o identyfikacje elementu


by adikomp 9 July 2019, 09:23
Witam
dzięki Vogelek za dołączenie bo z forum chyba jesteś najlepszym specjalistą jaki mógł tu zajrzeć wiec dla ciebie to pestka, :) ale do rzeczy sterownik to DDA001AG, natomiast połączenia diody ZD31 są następujące:
anoda diody do nogi 7,
katoda diody do nogi 5,
noga czwarta nie występuję w układzie.
Pozdrawiam.

#6 Re: ADP-240AR prosba o identyfikacje elementu  [SOLVED]


by Vogelek23 9 July 2019, 12:01
adikomp wrote:bo z forum chyba jesteś najlepszym specjalistą jaki mógł tu zajrzeć
Bez przesady - na naszym forum jest sporo osób, których wiedza znacznie przewyższa moją.

Źle liczysz nogi - patrząc na zdjęcie, pierwsza noga jest w lewym dolnym rogu, 8 noga w prawym dolnym rogu, 16-sta w lewym górnym rogu a "brakuje" nogi 13. Licząc natomiast "po Twojemu", dioda Zenera DZ31 to BZV55C18. Jest to dioda zabezpieczająca sterownik DDA001AG, a w zasadzie to jego pin zasilania Vcc, przed wzrostem napięcia powyżej 18V (maksymalne napięcie zasilania tego sterownika wynosi bowiem 20V). Jeśli TV był włączany bez tej diody, sterownik mógł dostać napięcie wyższe, niż 20V i się uszkodzić - warto wymienić ten układ, montując diodę DZ31. W przypadku problemów ze znalezieniem oryginału, bezpośrednim zamiennikiem DDA001AG jest NCP1396Ax (NCP1396AG lub NCP1396ADR2G).

Re: ADP-240AR prosba o identyfikacje elementu  [SOLVED]


by Google Adsense [BOT] 9 July 2019, 12:01

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.