• Adapter ICSP dla RT809H.

Forum rules:Click here to view the forum rules

  1. Topic title should contain the brief description of problem.
  2. Topic message should contain the extended description of problem and, the question.
  3. It is not allowed to post the attachments with complete documentations or BIOS files nor linking to any 3rd party websites hosting such files. It is only allowed to post the small portion of the documentation (up to one page per post).
  4. You can only describe one problem per topic. For each another problem you should open a new topic.
  5. It is strictly forbidden to ask for any kind of documentation or BIOS file. For such requests please use the DOCUMENTATION & BIOS/EFI REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Adapter ICSP dla RT809H.


by HotIce 22 May 2019, 12:29
Witam kolegów,
Po tym jak uszkodził się mój TL866A, kupiłem RT809H. Przeoczyłem że nie ma on port ICSP jak poprzedni programator tylko ISP. Potrzebuję zaprogramować układy Atmega88PA. Znalazłem i kupiłem adapter ICSP który rzekomo pasuje do RT809F i RT809H. Okazuje się że to jakiś adapter widmo, nie ma żadnej opcji w oprogramowaniu programatora, nie ma w internecie żadnych informacji jak to używać...Może ktoś ma pomysł jak to uruchomić?
Image

Re: Adapter ICSP dla RT809H.


by Google Adsense [BOT] 22 May 2019, 12:29

#2 Re: Adapter ICSP dla RT809H.


by matic 22 May 2019, 18:10
Hello!

You bought an ICSP adapter, which is actually not necessary to program the ATMEGA88 chip. You should program that chip via ISP (not ICSP) without any adapter.

ISP pinout on the programmer is the following:
Pin 1= RST
Pin 2= MISO
Pin 4= GND
Pin 5= MOSI
Pin 6= SCK

Image

Connect the chip as described, open the programmer software and select the chip "ATMEGA88 #ISP". Connect your circuit with ATMEGA chip to the power supply and then you should be able to program the chip with Write/Read/Verify and other buttons in the programmer software.

#3 Re: Adapter ICSP dla RT809H.


by HotIce 23 May 2019, 15:41
Dziękuję kolego, zapomniałem napisać że wiem o tym sposobie programowania, chciałem żeby napięcie zasilania było podawane w momencie programowania z programatora za złącza ICSP tak jak było w TL866A, nie da się tego uruchomić? dlaczego produkują taki adapter skoro nie działa?

#4 Re: Adapter ICSP dla RT809H.


by matic 23 May 2019, 19:44
Try to connect the power supply pin of your circuit to pin 8 of the programmer.

HotIce wrote:dlaczego produkują taki adapter skoro nie działa?
As I said that adapter is ICSP (not ISP), so it is not suitable to programming your ATMEGA chip.

#5 Re: Adapter ICSP dla RT809H.


by HotIce 25 May 2019, 08:54
matic wrote:As I said that adapter is ICSP (not ISP), so it is not suitable to programming your ATMEGA chip

ok, ale dlaczego TL866A programuje poprawnie mikrokontrolery Atmega przez złącze ICSP? Oznaczenia sygnałów są takie same, czy to jest kwestia tego że RT809H nie ma algorytmu obsługi adaptera ICSP?

#6 Re: Adapter ICSP dla RT809H.


by Vogelek23 25 May 2019, 13:56
HotIce wrote:ok, ale dlaczego TL866A programuje poprawnie mikrokontrolery Atmega przez złącze ICSP?
A czym się różni ICSP od ISP? :wtf: Przecież to jest dokładnie ten sam interfejs programowania pamięci mikrokontrolera "w obwodzie", lub jak kto woli "w systemie". Po prostu wyprowadzasz stosowne sygnały z podstawki (zasilanie, MISO, MOSI, SCK, RST) do złącza ISP płytki, na której jest mikrokontroler i programujesz.

#7 Re: Adapter ICSP dla RT809H.


by HotIce 26 May 2019, 10:25
Vogelek23 wrote:A czym się różni ICSP od ISP? Przecież to jest dokładnie ten sam interfejs programowania pamięci mikrokontrolera "w obwodzie", lub jak kto woli "w systemie".

Właściwie tak.. pozostaje tylko pytanie po co powstał adapter który kupiłem?

#8 Re: Adapter ICSP dla RT809H.


by Vogelek23 26 May 2019, 11:44
Zamieść wyraźne zdjęcia obu stron płytki tego adaptera, może coś odkryjemy.

#9 Re: Adapter ICSP dla RT809H.


by HotIce 26 May 2019, 13:18
Image

Image

#10 Re: Adapter ICSP dla RT809H.


by matic 26 May 2019, 17:41
There is nothing special on that adapter board.
Small chip U1 is 3,3V LDO regulator.
SO-8 chip is a switching boost DC/DC converter from 5V to 12,6V.

As I said you can program ATMEGA88 chip without that adapter.
If you want to use that adapter anyway, the pin out should be the following:

Image

I'm not sure about the VCC pin. If it does not work, try to supply your circuit from external 5V power supply (leave the VCC pin on the adapter unconnected in this case). If it would work in this case, let us know to determine further.

#11 Re: Adapter ICSP dla RT809H.


by Vogelek23 26 May 2019, 19:59
Ten adapter służy głównie do programowania układów, które potrzebują wyższego niż 5V napięcia programowania (wiele mikrokontrolerów serii PIC potrzebuje napięcia ok. 12,5V na pinie Vpp). Ponieważ sam programator nie dostarcza na podstawce napięcia wyższego, niż 5V, robi to właśnie układ MC34063. Resztę napisał już kol. matic.

#12 Re: Adapter ICSP dla RT809H.


by HotIce 30 June 2019, 10:26
Wracając do tematu... podłączyłem Atmega88PA według schematu z rysunku który wyświetla się w aplikacji do RT809H, niestety nie ma komunikacji, zasilanie 5v dałem z zewnętrznego źródła, po wciśnięciu "read" mam komunikat:

Code: Select all075:  The currently selected:ATMEGA88 #ISP, capacity: 64Kbits, 8Kbytes.
076:  EEPROMArea size: 4096 bitsŁ¬512 bytesŁ¬the starting position in the buffer zoneŁş0x2000.
077:  Chip configuration bits size: 128 bitŁ¬16 bytesŁ¬the starting position in the buffer zoneŁş0x2200.
078:  http://www.ifix.net.cn/thread-12996-1-8.html
079:  >------------------------------------OK---------------------------------------<
080:  -->Frequency auto adjust, rescanning ISP BUS...
081:  The current chip ID: 0x1E930F, the selected model of operation has been terminated.
082:  Programmer setup error.


#13 Re: Adapter ICSP dla RT809H.


by Vogelek23 30 June 2019, 11:53
Wybrałeś ATmega88, który ma inny chip ID (0x1E930A) niż ATmega88P/PA (0x1E930F). I stąd ten problem.

#14 Re: Adapter ICSP dla RT809H.


by HotIce 30 June 2019, 14:47
Vogelek23 wrote:Wybrałeś ATmega88, który ma inny chip ID (0x1E930A) niż ATmega88P/PA (0x1E930F). I stąd ten problem.

Czyli tym programatorem nie ma szans żeby zaprogramować Atmega88PA? bo w aplikacji takiego nie ma na liście..

#15 Re: Adapter ICSP dla RT809H.


by Vogelek23 30 June 2019, 15:00
HotIce wrote: Czyli tym programatorem nie ma szans żeby zaprogramować Atmega88PA? bo w aplikacji takiego nie ma na liście..
Spróbuj odznaczyć sprawdzanie Chip ID w ustawieniach programu (Setting -> Programming setup options). Oczywiście wybierz układ ATmega88 z listy.

Image

#16 Re: Adapter ICSP dla RT809H.


by HotIce 1 July 2019, 17:31
Niestety odznaczenie tej opcji nic nie zmienia, w TL866 odznaczenie Check ID działało, ogólnie aplikacja obsługująca RT809H jest mizerna a organizacja okna aplikacji, przycisków i menu wygląda jak by to wykonał przedszkolak.. Odnośnie pominięcia tego sprawdzania to może jakiś parametr w linii komend istnieje?

Re: Adapter ICSP dla RT809H.


by Google Adsense [BOT] 1 July 2019, 17:31
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.