• TV SHARP LC24LE240E - po burzy

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 TV SHARP LC24LE240E - po burzy


by indicheq 2 May 2016, 13:09
Witam.
Jak w temacie TV na zasilaczu VESTEL 17PW80 i logice 17MB62-2.6.
Uszkodzeniu uległ: ICE3BR1765J, dwa rezystory 2.2Ω dla linii CS tego układu, dioda D704.

Wszystkie elementy zostały wymienione. Na wyjściu mam zamiast 24V, 22V natomiast na linii 12V mam 11V.
Zasilacz zachowuje się tak jak by nie miał mocy. Po odłączeniu płyty podświetlenia, TV startuje i działa.
Płyta podświetlenia jest OK.

Proszę o pomoc.

W załączniku schemat zasilacza.



You have to be logged in to view the files attached to this post.

Re: TV SHARP LC24LE240E - po burzy


by Google Adsense [BOT] 2 May 2016, 13:09

#2 Re: TV SHARP LC24LE240E - po burzy


by amorphe 2 May 2016, 18:35
dwa rezystory 2.2Ω dla linii CS tego układu

Dlaczego wymieniłeś tylko dwa - na schemacie widzę cztery.
Wylutowałeś i sprawdziłeś pozostałe dwa ?
Nie wspomnę, że te rezystory (ich parametry) są bardzo ważne.
Jakie napięcie masz na kondensatorach sieciowych (C705/C706) ?

Sprawdź też elementy między punktami Vc a VCC oraz cały obwód Feedback - w szczególności półprzewodniki (czyli D716, IC701, D718)

#3 Re: TV SHARP LC24LE240E - po burzy


by indicheq 6 May 2016, 18:01
Na schemacie były 4 a na płycie oryginalnie 2x 2.2Ω.
Na kondensatorach mam po 330V, elementy D716 wymieniona na Zener 12V, IC701 zostały wymienione, D718 sprawna.
FeedBack wygląda też w porządku.

#4 Re: TV SHARP LC24LE240E - po burzy


by Vogelek23 6 May 2016, 22:04
indicheq wrote:Na wyjściu mam zamiast 24V, 22V natomiast na linii 12V mam 11V.
To są napięcia mierzone "na sucho", bez obciążenia? Jeśli tak, to jak wyglądają oscylogramy tych napięć pod obciążeniem? Niecałe 10% "ubytku" tragedii tutaj nie powinno robić, reszta układów powinna pracować przy tak zaniżonych napięciach.

indicheq wrote:D718 sprawna
Jak sprawdziłeś poprawność pracy D718 (TL431)? Jaka jest wartość napięcia referencyjnego między anodą a elektrodą sterującą?

indicheq wrote:Uszkodzeniu uległ: (...) dioda D704
Spójrz jeszcze raz na schemat - co musiało się stać, aby ta dioda została uszkodzona? Z jednej strony owszem, podłączona wprost pod uzwojenie robocze, ale z drugiej tylko pod kondensator 12nF, równoległy 470pF oraz szereg rezystorów o dość dużej oporności, których wypadkowa rezystancja jest nieznacznie mniejsza, niż wartość rezystora 2-watowego. Nie zastanawia Cię zatem fakt uszkodzenia tej diody? Diody uszkadzają się zazwyczaj z dwóch powodów - albo przekroczony prąd przewodzenia, albo przekroczone napięcie wsteczne.

Re: TV SHARP LC24LE240E - po burzy


by Google Adsense [BOT] 6 May 2016, 22:04
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.