• Lenovo P52 - brak reakcji na włącznik

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Lenovo P52 - brak reakcji na włącznik


by timon521182 15 December 2025, 21:14
Witam Szanowne grono

Płyta NM-B561 Rev 1.0
CPU Intel Core i7-8850H
GPU NVIDIA QUADRO P3200
Płyta nie daje żadnej reakcji na włącznik

Na PQ1 :
n.1 - 20V
n.4 - 20V
n.5 - 6,7V

Na włączniku JPBTN1:
n.2 - 3.2V po naciśnięciu spada do zera

Na PL1 - 0.47V
Na PL5 - 3,3V
Na PL4 - 5V
Na PL701 - 1,04V
Na PL19 - 0,51V
Na wszystkich innych 0V


PL1 - 39Kohm
PL4 - 28kOhm
PL5 - 1,1 Kohm
PL6, 7, 8, 11 - 2,3 Ohm
PL10 - 12.4 Ohm
PL12 - 4.6 Ohm
PL13 - 29 Ohm
PL16 - 43 Ohm
PL17 - 4.6 Kohm
PL18 - 67 Ohm
PL19 - 3,9 Kohm
PL108 - 77Ohm
PL401, 402, 403 - 0.30 Ohm
PL701 - 47 Ohma

Jedyne co zauważałem pod termowizją delikatnie niemal nie zauważalnie nagrzewa się u34 (BD4718) po za tym żądnej innej reakcji płyty na podłączenie nie widzę. Co jeszcze mógł bym sprawdzić? Proszę o pomoc

Re: Lenovo P52 - brak reakcji na włącznik


by Google Adsense [BOT] 15 December 2025, 21:14

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.