•  Lenovo L340 NM-C361 Rev 1.0 brak obrazu po wymianie PU2901

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1  Lenovo L340 NM-C361 Rev 1.0 brak obrazu po wymianie PU2901


by Radek1990 19 November 2024, 21:49
Laptop trafił do mnie z niską rezystancją na PL3501 (7 Ohm), wymieniłem PU2901 MP2979A na MP2949A z płyty dawcy o tym samym oznaczeniu, płyta startuje prąd pływa 1,6-1,7A następnie restartuje się, prąd delikatnie pływa między 1,6 - 1,7A i po chwili spada na 1,43A i tak już zostaje.
Próbowałem wgrać inny bios, wyczyściłem KBC, widać po prądzie że się programuje ale płyta zachowuje się tak samo.
Wydaje mi się, że układy MP2979 i MP2949 powinny być zamienne skoro występują na płytach o tych samych oznaczeniach i rewizji chociaż przy wersji MP2979 na płycie mam obsadzony PR2905, a w wersji z MP2949 jest PR5842.
Podejrzewam uszkodzony procesor z uwagi na niską rezystancję PL701 - 7 Ohm
czyli tyle ile miałem na PL3501 przed wymianą układu.
Porównywałem z innymi tematami i na tej cewce zwykle jest ok 50 Ohm.

Procesor jest uszkodzony czy mogę coś jeszcze sprawdzić ?

V / Ohm
PL3502- 5,1V / 30K i rośnie
PL3501- 3,3V / 10,7K
PL301- 12,5V(bateria odpięta) / 2M
PL503- 1,06V / 58 Ohm
PL501- 1,22V / 120 Ohm z ramem
PL7501/02- 0,8V / 0,7 Ohm
PL701- 1V - / 7 Ohm
PL5501- 1,37V / 127 Ohm
PL3201- 1,03V / 13,4 Ohm
PL3001/2/3- 0,97V / 3,4 Ohm
PL5804- 0,97V / 3,4 Ohm
PL3102 - 0v / 8,7 Ohm

Re:  Lenovo L340 NM-C361 Rev 1.0 brak obrazu po wymianie PU2901


by Google Adsense [BOT] 19 November 2024, 21:49
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 5 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.