• Lenovo IdeaPad 3 15IIL05 - NM-D031 po zalaniu nie uruchamia się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Lenovo IdeaPad 3 15IIL05 - NM-D031 po zalaniu nie uruchamia się


by domo997 28 November 2023, 18:00
Pacjent to Lenovo IdeaPad 3 15IIL05 po zalaniu. Płyta główna dokładnie wyczyszczona. Po podłączeniu zasilacza pobiera ok 150mA i płyta próbuje startować - zaświeca się dioda POWER. Mam napięcia +5V, 3V i odziwo pojawia się napięci +VCCIN (na procesorze 1.8V - PL3401). Nie mam napięcia +1.8VALW (jest ok 0,25V). Po odlutowaniu zwory PJ1308 pojawia się napięcie +1.8VALW i płyta nie próbuje się odpalać - wtedy pobór ok 7mA.

brak zwarcia za PJ1308. Czyżby uszkodzony CPU?

płyta: GS454/GS554/GV450/GV550 NM-D031

Re: Lenovo IdeaPad 3 15IIL05 - NM-D031 po zalaniu nie uruchamia się


by Google Adsense [BOT] 28 November 2023, 18:00

#3 Re: Lenovo IdeaPad 3 15IIL05 - NM-D031 po zalaniu nie uruchamia się


by domo997 30 November 2023, 17:23
Machine wrote:Most likely the PCH contained in the APU is faulty.
Do this test:
Do the test described here on PJ130, side without 1.8v (explained at the end of lesson 3):
post5699.html#p5699


Brak zwarcia, pobór prądu ok 100mA na PJ130
Jakieś inne pomysły? Bios programowałem i dalej to samo.

Re: Lenovo IdeaPad 3 15IIL05 - NM-D031 po zalaniu nie uruchamia się


by Google Adsense [BOT] 30 November 2023, 17:23
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 5 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.