• Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#21 Re: Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się


by matic 14 May 2018, 19:18
WowaTatarin wrote:Teraz mam pytanie jaką diodę tam wstawić, czy wystarczy cokolwiek (od innego laptopa, tabletu etc, czy konkretny model?)
The original one is AZ5425-01F, as @gofer said, but you could use any 5V ESD protection diode (TVS diode) in this place. Datasheet at the attachment.

WowaTatarin wrote:oraz w jakiej polaryzacji, bo z tego co zostało, to już nic nie odczytam.
The original diode is "bi-directional" type, so the polarization is not important.
You could use "uni-directional" type of diode as well, but in this case you need to polarize it correctly -> Anode (+ pin) of diode should be connected to ground.



You have to be logged in to view the files attached to this post.

Re: Re: Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się


by Google Adsense [BOT] 14 May 2018, 19:18

#22 Re: Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się


by WowaTatarin 15 May 2018, 20:05
Ok, ale jak rozumiem, przy standardowych warunkach (tj idealny zasilacz i pewność braku zwarć), ta dioda się nie załącza i niemal nie ma wpływy na układ?
Bo aktualnie, i tak nie powodowała zwarcia, a jednak płyta się nie uruchamiała. I mam pytanie, czy to na pewno moje największe zmartwienie?

EDIT: Ponadto jak popatrzyłem na allegro, to zauważyłem, że taka płyta, z grafiką dedykowaną (jak moja) można kupić już za 300 zł. Zastanawiam się więc, czy naprawa będzie opłacalna. Oczywiście są walory w postaci zdobytej wiedzy i umiejętności, ale jednak nie robię tego dla siebie.

#23 Re: Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się


by grzewoj 15 May 2018, 23:19
To tylko zabezpieczenie, nie ma wpływu na normalne działanie układu.

#24 Re: Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się


by matic 15 May 2018, 23:37
WowaTatarin wrote:Ok, ale jak rozumiem, przy standardowych warunkach (tj idealny zasilacz i pewność braku zwarć), ta dioda się nie załącza i niemal nie ma wpływy na układ?
Bo aktualnie, i tak nie powodowała zwarcia, a jednak płyta się nie uruchamiała. I mam pytanie, czy to na pewno moje największe zmartwienie?
This diode is only protection device, which protect the KBC chip against high voltage sparks (static electricity), which can occure in the case of "hot plug" the adapter.
Measure the resistance between both pads of these diode. If the resistance is low the diode is bad, if the resistance is high (infinite) the diode is 95% ok.
The laptop should works normally without this diode, but it is better to use this diode for the above reasons.

In your case the issue is more than likely KBC chip related, as said in previous posts.

Re: Lenovo G50-45 ACLU5/ACLU6 NM-A281 - nie włącza się


by Google Adsense [BOT] 15 May 2018, 23:37

Who is online

Users browsing this forum: Dino740827 and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.