• LENOVO 100-15IBY brak obrazu

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 LENOVO 100-15IBY brak obrazu


by terabajt 13 August 2019, 13:40
Dzień dobry.
LENOVO 100-15IBY płyta AIVP1/AIVP2 LA-C771P REV 1.0. Po podłączeniu zasilania i naciśnięciu power świeci się LED1, brak obrazu.
Zmierzyłem napięcia względem masy:
PL 201 : 0,22V
PL 702: 0V
PL 703: 0V
PL 302: 3,3V
PL 402: 0V
PL 304: 5,0V
Opór:
PL 201 : <1999 kOHM
PL 702: 19,7 OHM
PL 703: 13 OHM
PL 302: 38 kOHM
PL 402: 0,32 kOHM
PL 304: 102 kOHM

PQ201: n1-n8: 20V, n4: 25V
na włączniku 3,0V
po naciśnięciu power napięcie na cewce strasznie rośnie (czemu aż tak?):
PL 402: 104V
PL 702: 157V
PL 703: 109V
Proszę o pomoc.

Re: LENOVO 100-15IBY brak obrazu


by Google Adsense [BOT] 13 August 2019, 13:40

#2 Re: LENOVO 100-15IBY brak obrazu


by sebastiank 13 August 2019, 13:52
terabajt wrote:na włączniku 3,0V
po naciśnięciu power napięcie na cewce strasznie rośnie (czemu aż tak?):
PL 402: 104V
PL 702: 157V
PL 703: 109V
Proszę o pomoc.

Zmierz napięcia po stronie filtracji (kondensatorów) względem masy.

terabajt wrote:PL 402: 0V
- zacznij od pomiarów tej przetwornicy PU303 - podaj napięcia z nóżek 7, 8, 11.

#3 Re: LENOVO 100-15IBY brak obrazu


by xamledyD 13 August 2019, 13:55
Witam.
Na zewnętrznym monitorze również brak obrazu?
terabajt wrote:po naciśnięciu power napięcie na cewce strasznie rośnie (czemu aż tak?):
PL 402: 104V
PL 702: 157V
PL 703: 109V

Czym mierzysz te napięcia? Bateria w mierniku sprawna? Pomiary robione na zakresie automatycznym czy ręcznym? Nie ma przypadkiem kropki po "jedynce"? "Z drugiej strony" cewki również otrzymujesz takie wyniki?
Podaj pobór prądu laptopa.
Jaka jest wcześniejsza historia sprzętu?
Przeprogramowywałeś BIOS?
Pozdrawiam

#4 Re: LENOVO 100-15IBY brak obrazu


by terabajt 13 August 2019, 21:43
Witam,
Pomiary od strony kondensatorów:
na wyłączonym:
PU303
n7: 0V
n8: 0V
n11: 5V
Po wciśnięciu POWER:
zaczyna pobierać 0,12A
PU303:
n7: 3,3V
n8: 3,3V
n11: 5V
PL402 od strony kondensatorów: 1,4V
PL 702 od strony kondensatorów: 0,07V
PL 703 od strony kondensatorów: 0,09V
Napięcia miernik UNIT, baterie nowe, 9V. Pomiary w zakresie ręcznym. Z drugiej strony wyniki dużo niższe (jest ok? czemu takie różnice?)
Wcześniejsza historia sprzętu: laptop działał, wyłączył się i już nie uruchomił.
BIOS przeprogramowany.

#5 Re: LENOVO 100-15IBY brak obrazu


by sebastiank 14 August 2019, 06:34
Sprawdź drobnicę przy PU303 oraz czy nie ma zwarcia na n. 20 (+0.675VSP). Jeśli nie znajdziesz uszkodzeń drobnicy - podmień PU303.
W zał. fragment schematu.



You have to be logged in to view the files attached to this post.

#6 Re: LENOVO 100-15IBY brak obrazu


by terabajt 22 August 2019, 13:44
Po wymianie PU303 na nowy:
n7:3,3V
n8: 0 i skacze do 3,3V
n11: 5,0
n20:0,0 V i skacze do 0,4V.
Na cewce PL 402 skacze od 0.8V do 0

Czy PU303 znowu jest uszkodzony?

Czy RT8207PGQW_WQFN20_3X3 można wymienić na jakikolwiek RT8207?

Laptop po uruchomieniu POWER pobiera 0,04A i spada do 0 i tak cały czas.

#7 Re: LENOVO 100-15IBY brak obrazu


by sebastiank 22 August 2019, 15:03
Sprawdź rezystancję na PL402 i n.20 PU303. Pomiar względem masy.

#9 Re: LENOVO 100-15IBY brak obrazu


by terabajt 22 August 2019, 19:33
PL 402: 0,3k
PU303 pin 8: 1,4M
PU303 pin 20: 34,7k

#10 Re: LENOVO 100-15IBY brak obrazu


by matic 22 August 2019, 20:26
terabajt wrote:Czy RT8207PGQW_WQFN20_3X3 można wymienić na jakikolwiek RT8207?
No. It is important that the chip is RT8207P. Have you replaced that chip with correct one?
If so, remeasure the voltages to ground on pins 5, 7, 8, 9, 10, 11, 12, 18, 20 of PU303, when the laptop is turned on (power LED is turned on).

#11 Re: LENOVO 100-15IBY brak obrazu


by terabajt 23 August 2019, 06:26
No właśnie nie, wymieniłem na RT8207M, czy bardzo zaszkodziłem? Zamawiam dzisiaj prawidłowy. Czy zaopatrzyć się w coś jeszcze od razu?

#12 Re: LENOVO 100-15IBY brak obrazu  [SOLVED]


by matic 23 August 2019, 20:23
terabajt wrote:No właśnie nie, wymieniłem na RT8207M, czy bardzo zaszkodziłem?
No, it didn't damage anything.

RT8207P is available on Arvika (sklep.arvika.pl). Order code: SMD1962

#13 Re: LENOVO 100-15IBY brak obrazu


by terabajt 20 September 2019, 08:56
Ok, po wymianie na RT8207P napięcia:
n5: 0,68
n7: 3,3
n8: 3,3
n9: 0,98
n10: 1,23
n11: 5,1
n12: 5,1
n18: 7,12
n20: 0,68.
Laptop uruchomił się, brak obrazu.
PL402: 160 OHM - więc podmieniłem RAM, laptop uruchamia się prawidłowo, jeszcze zrobię testy i napiszę, czy wszystko działa prawidłowo.
Czy zastosowanie RT8207M mogło uszkodzić pamięć RAM? Czy jest ona naprawialna?

#14 Re: LENOVO 100-15IBY brak obrazu


by matic 21 September 2019, 18:20
terabajt wrote:Czy zastosowanie RT8207M mogło uszkodzić pamięć RAM?
Probably yes, but I'm not 100% sure.
terabajt wrote: Czy jest ona naprawialna?
In this case the repair of RAM module it is probably unprofitable, because there are probably bad all of the memory chips on it.

#15 Re: LENOVO 100-15IBY brak obrazu


by terabajt 21 September 2019, 21:19
RAM poszedł do śmieci, wszystko działa, dziękuję wszystkim.

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.