• HP 255 G7 - nie odpala i nie ładuje

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS / firmware files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP 255 G7 - nie odpala i nie ładuje


by Adieu 4 December 2025, 19:01
Witam serdecznie.
Znajomy podrzucił laptopa do sprawdzenia, nagle przestał działać i nie ładuje. Oczywiście ładowarka itd. podzespoły sprawdzone.

Po rozkręceniu znalazłem rozlany element. Dołączam fotę. Płyta główna EPV1 LA-G078P. Ktoś podrzuci info co to za element?

Image

Z góry dziękuję za wszelką pomoc.

Re: HP 255 G7 - nie odpala i nie ładuje


by Google Adsense [BOT] 4 December 2025, 19:01

#2 Re: HP 255 G7 - nie odpala i nie ładuje


by Vogelek23 4 December 2025, 23:27
PQM1 to podwójny MOSFET AONH36334, natomiast kondensator obok niego (PCM3) ma parametry 10µF/25V (obudowa 0805).

#3 Re: HP 255 G7 - nie odpala i nie ładuje


by Adieu 6 December 2025, 15:55
Dziękuję serdecznie.
Mam jeszcze jedno pytanie, otóż byłem niemal pewien co się wydarzy, kondensator odlutował się razem z padem. Załączam zdjęcie z prośbą o wskazanie gdzie poprowadzić przelotkę. Niestety nie posiadam schematu płyty.

Image

#4 Re: HP 255 G7 - nie odpala i nie ładuje  [SOLVED]


by Vogelek23 6 December 2025, 17:29
Adieu wrote:gdzie poprowadzić przelotkę
Nigdzie. Wystarczy zeskrobać delikatnie skalpelem wierzchnią warstwę tlenków do czystej miedzi (obszar zaznaczony poniżej na czerwono), dać trochę topnika, ocynować pad i wlutować nowy kondensator.
Image

#5 Re: HP 255 G7 - nie odpala i nie ładuje


by Adieu 10 December 2025, 23:47
Dziękuję pięknie za podpowiedzi przyjacielu! Bardzo rzadko takie rzeczy robię, głównie hobbystycznie, dlatego dopytuję. Kondensator wlutowany, laptop odpala, problem rozwiązany.

Re: HP 255 G7 - nie odpala i nie ładuje


by Google Adsense [BOT] 10 December 2025, 23:47

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.