• HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display

Regole del forum:Clicca per leggere le regole del forum

  1. Il titolo dell'argomento deve contenere: marca e modello completo del dispositivo e la breve descrizione del problema.
  2. Il messaggio di argomento dovrebbe contenere: un identificatore PCB (in caso di riparazioni hardware), descrizione estesa del problema, cosa è stato controllato/sostituito/misurato, eventuali conclusioni e la domanda. Se non riesci a individuare un identificatore PCB, leggi QUESTO ARGOMENTO. Se non riesci ancora a individuare un identificatore PCB, invia foto chiare di entrambi i lati della scheda madre; è necessario rimuovere qualsiasi pellicola o altri elementi che potrebbero coprire questo identificatore.
  3. Prima di pubblicare un nuovo argomento, leggere tutti gli argomenti nel subforum CORSI e fare una diagnosi preliminare basata sul contenuto di questi corsi.
  4. È VIETATO caricare diagrami completi, file BIOS / firmware o qualsiasi altro tipo di documentazione (o collegarsi a siti Web con tali file). Puoi caricare solo una piccola parte della documentazione o collegarti al file del BIOS nel subforum BIOS FILE NON VERIFICATI. Non è consentito caricare più di una pagina completa di istruzioni/diagrami per singolo argomento. Il file che carichi non deve contenere filigrane, contrassegni "Riservati", link o indirizzi email e non può essere protetto da password.
  5. È consentito descrivere un solo dispositivo difettoso per singolo argomento - dovresti sempre aprire un nuovo argomento per ogni dispositivo successivo.
  6. La richiesta degli diagrami completi, dei file BoardView, dei file BIOS o di qualsiasi altro tipo di documentazione NON È CONSENTITA in questo subforum. Se hai bisogno di chiedere uno di questi, dovresti aprire un nuovo argomento nel subforum DOCUMENTAZIONE E RICHIESTA BIOS/EFI.
Questo argomento è contrassegnato come D'ARCHIVIO. Rispondi solo se il tuo messaggio contiene la soluzione (Termini e Condizioni p. 12.1).

#1 HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da KenM0560 25 agosto 2020, 10:20
Hello

I have a HP 14-CK (GRANGER 6050A2977601 MB A02) laptop. There was a small amount of liquid damage in the area circled in yellow on the picture, this was causing a short on the 19v line. I changed this component and also the dual mosfet below it and this cleared the short and the board was able to power on again. But it will power on with no display and will just hang and consumes around 0.32mA on the powr supply.

Immagine

I have all voltages on the coils (see picture). The coil to the right of the Hybrid CPU has 0v but i compared this to a working board and on a working board it also has 0v?

I have programmed a new BIOS file and still no change. Can anybody help diagnose further.

Thank you.

Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da Google Adsense [BOT] 25 agosto 2020, 10:20

#2 Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da matic 25 agosto 2020, 22:40
Hello!

Measure the power consumption (in mA) of the board in the following cases with disconnected main battery:
a) Machine turned off.
b) Machine turned on with RAM memory connected.
c) Machine turned on without RAM memory.

#3 Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da KenM0560 26 agosto 2020, 11:18
Hi matic

With the main battery disconnected i get the following power consumption readings

a) turned off = 0.01mA
b) turned on with RAM = around 0.35mA (when first trying it can rise as high as 0.44mA but then drops to 0.35, on subsequent attempts it will only go up to 0.27 - 0.31mA)
c) turned on without RAM = 0.35mA (then drops to 0.25mA)

It seems if the board is left for a while, on first attempt to power on it will rise to a higher value, but if you try to power on after this it will not reach that consumption again.

*note the CPU and heatsink is getting warm

#4 Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da matic 26 agosto 2020, 19:34
You probably mean the units in amps [A] and not in milliamps [mA].

Try to reflash the KBC chip with programmer. Don't forget to save the old dump.

#5 Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da KenM0560 27 agosto 2020, 10:29
Yes your right, i was reading directly fom the powersupply.

I programmed the KBC with a new file from a working board and the issue still remains. After initially reaching about 350mA it will drop to around 270mA.

#6 Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da matic 27 agosto 2020, 19:27
Unfortunately it is very likely damaged APU hybrid.
The APU probably needs to be replaced.

#7 Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da KenM0560 28 agosto 2020, 09:13
Ok i was kind of expecting that, it seems to happen a lot. It would be a lot better if they were still fitted with a socket.

Thanks for your help with it.

Re: HP 14-CK (GRANGER 6050A2977601 MB A02) - Power on, No Display


da Google Adsense [BOT] 28 agosto 2020, 09:13
Questo argomento è contrassegnato come D'ARCHIVIO. Rispondi solo se il tuo messaggio contiene la soluzione (Termini e Condizioni p. 12.1).

Chi c’è in linea

Visitano il forum: Nessuno e 5 ospiti

_______________________________
Tutti i diritti riservati. È severamente vietata la copia non autorizzata del contenuto di questo sito Web o di qualsiasi sua parte.
Eventuali marchi, nomi di società, prodotti o servizi pubblicati su questo sito Web appartengono ai legittimi proprietari, sono protetti da copyright e utilizzati solo a scopo informativo.