English Polski Русский Slovenščina Deutsch (Du)
  • Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the machine's manufacturer, full model and short description of failure.
  2. Topic message should contain: a PCB marking code (in case of hardware repairs), extended description of failure, what was checked/replaced/measured + conclusions and, the question. If you can't find a PCB marking code, you should read THIS TOPIC. If you still can't find a PCB markings, please put a clean, both-side, photos of the mainboard - it is required to remove any films and modules which possibly could cover these markings.
  3. Before posting a new topic, you should read all the topics in TRAININGS subforum and make a preliminary diagnostic based on the content of that trainings.
  4. Uploading of any complete instruction/schematics or BIOS files (or linking to other websites with such stuff) is STRICTLY PROHIBITED. You can only place the small portion of instruction/schematic or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplify the diagnostic/repair for the topic author. You can't place more then one complete page of instruction/schematic per single topic. File can't have any visible watermarks, "confidential" marks, email addresses etc.
  5. It is only allowed to describe a single faulty machibe per topic. For every other machine you should open a new topic.
  6. Asking for schematics, boardview, MB photos, BIOS files or service manuals is NOT ALLOWED. If you want to ask for any of these, you should open a new topic on DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by valieromarco 23 April 2020, 01:41
This motherboard was spilled by water, there is no big damaged on motherboard.
It arrived as dead, but I turn it on for the first time and it power in with video, so I cleaned all motherboard but now it power on but no image.
No CPU power.
I have not boardview file.

Image

Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by Google Adsense [BOT] 23 April 2020, 01:41

#2 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by matic 23 April 2020, 08:51
valieromarco wrote:Motherboard MCLA BA92-09093A
Hello!
This code is probably from the label. There should be another code (BA41-01xxxx) directly on the motherboard. It is probably located near the fan hole on the board.

Please, post a clear picture of spilled area of the board.

#3 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by valieromarco 23 April 2020, 11:57
Image

This is the motherboard code


External area was spilled with no any damaged components, inside area was more damaged but no burned components, just oxidation.

Image

#4 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by matic 23 April 2020, 12:21
valieromarco wrote:I have not boardview file.
BoardView for motherboard revision 1.0 is available on the forum. I think it should fit with your board. ***click***

Highlighted two components seems corroded, also check all other components for signs of corrosion. Start with replacing all corroded components.
Check, if there are spill residues between the pins of QFN chip. If so, it is need to remove the chip from the board, cleaned the board thoroughly and solder the chip back to the place.

Image

#5 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by valieromarco 23 April 2020, 20:50
I cleaned and resoldered but issue is still there.
I checked these coils


Image

#6 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by matic 23 April 2020, 22:31
This resistance seems a bit too low. The GPU may be damaged.

Measure the resistances to ground on all other coils.

#7 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by valieromarco 23 April 2020, 23:04
L501 and L502 = 4,4 ohm with CPU
L504 = 6,6 ohm with CPU
L509 = 186 ohm

#8 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by matic 24 April 2020, 09:12
Measure the power consumption (in mA) of the board before and after pressing to the power button.

#9 Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by valieromarco 24 April 2020, 12:21
Ok I’m out now I will check but I also checked ic 51117 (ddr power) it was corroded by water I don’t have right voltages, no power good no V out.

Power consumption is 0 A before and 0,11A after

Re: Samsung NP550P5C Motherboard MCLA BA92-09093A MCLAREN REV 1.2 POWER ON NO VIDEO


by Google Adsense [BOT] 24 April 2020, 12:21
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 11 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.