• Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Atikor 19 April 2019, 18:53
Witam.
Płyta zalana, została umyta w myjce. Obecnie płyta uruchamia się, pobiera 0.04A po podłączeniu do zasilacza.
Początkowo płyta miała uszkodzony rezystor PR8101, nie pobierała w ogóle prądu. Po wymianie pojawiły się napięcia +3VAO i +5VAO. Płyta pobierała 0.01A po wciśnięciu przycisku power pobór prądu wzrastał do 0.03A ale brakowało napięć +5VSUSO i +3VSUSO. Następnie został przeprogramowany bios co poskutkowało obecnym stanem. Płyta uruchamia się pobiera 0.04A, napięcie +5VSUSO waha się w okolicy 1V a +3VSUSO oscyluje między 2.2V a 2.9V.

Rezystancja:
-PL8100 - 2.31 kOhm
-PL8101 - 380 Ohm

Proszę o pomoc w rozwiązaniu problemu.

Pozdrawiam
Atikor

Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Google Adsense [BOT] 19 April 2019, 18:53

#2 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by matic 19 April 2019, 19:51
Hello!

All corroded (oxidized) components should be replaced. Regardless of whether they seem functional or not.

If it was already done, post a clear picture of the chip PU8100 with nearby surroundings. Also post a clear picture of coils PL8100 and PL8101 with nearby surroundings.

#3 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Atikor 19 April 2019, 20:26
Dokładnie obejrzałem płytę gdy ją dostałem i nie zauważyłem żadnych oznak korozji.
Image
Image

#4 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by matic 20 April 2019, 09:29
Measure the voltages to ground on pins 1, 2, 4, 5, 6, 7, 11, 12, 13, 14, 15, 19, 20 of PU8100, when the voltages on mentioned coils are not stable.

#5 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Atikor 20 April 2019, 17:33
PU8100:
1. 0.3V
2. 4.91V
4. waha się od 3V do 3.6V
5. waha się od 1.3V do 1.5V
6. 0.03V
7. waha się od 7V do 7.30V
11. 20V
12.6.75V
13. waha się od 0.5V do 0.540V
14. 5V
15. 3.29V
19. waha się od 5.4V do 5.6V
20. waha się od 0.7V do 0.9V

#6 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by matic 20 April 2019, 20:53
Replace PU8100 (RT8239B).

#7 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Atikor 23 April 2019, 21:00
Po wymianie układu PU8100 laptop uruchamia się.
Zastanawia mnie jedynie pobór prądu przez płytę w trybie stand-by wynosi 0.07A.
Płyta zaraz po podpięciu do zasilacza pobiera 0.04A a po chwili pobór wzrasta do 0.07A. W tym momencie napięcia na PL8100 oraz PL8101 są stabilne oraz poprawne. Przy poborze na poziomie 0.07A laptopa można bez problemu uruchomić.

Po wyłączeniu laptopa z przycisku nie mogę go już uruchomić. Pobór zatrzymuje się na 0.01A a po wciśnięciu przycisku pobór wzrasta do 0.03A i na tym poziomie pozostaje. W tym czasie brak napięć na PL8100 oraz PL8101.
Po przeprogramowaniu wsadu kości bios na nowo laptop wstaje i działa aż do kolejnego wyłączenia za pomocą przycisku. Ta sytuacja nie ma miejsca jeśli nie użyje do wyłączenia laptopa przycisku a po prostu odetnę zasilanie poprzez wyciągnięcie wtyczki zasilacza.

Po wlucie kości czekam około 10 min aby płyta ostygła.

Co w takim wypadku może być nie tak? Proszę o pomoc.

Skorzystałem z tego wsadu:
asus-k55a-sx373h-plyta-k55vd-rev-3-1-t45405.html

#8 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by matic 24 April 2019, 17:31
Atikor wrote:Po wyłączeniu laptopa z przycisku nie mogę go już uruchomić.
If I understood you correctly: For example, if you turn on the laptop to the BIOS (without hard drive connected) and turn the machine off with pressing on the power button, the machine won't start anymore?

#9 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Atikor 25 April 2019, 20:50
Tak dokładnie.

#10 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by matic 25 April 2019, 22:17
Try to replace the BIOS chip.

#11 Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Atikor 28 April 2019, 19:23
Kość biosu podmieniona, laptop zachowuje się dokładnie tak samo. Sprawdzałem inne wsady ale tylko na tym konkretnym asus-k55a-sx373h-plyta-k55vd-rev-3-1-t45405.html płyta w ogóle się uruchamia ale tak jak wspomniałem wcześniej po wyłączeniu za pomocą przycisku laptop już nie wstaje.
Na innych wsadach pobór prądu po naciśnięciu przycisku zatrzymuje się na poziomie 0.03A, brak napięć +3V oraz +5V.

Re: Płyta Asus K55VD - Niestabilne napięcie 3.3V i 5V


by Google Adsense [BOT] 8 May 2019, 07:28
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.