• Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 24 March 2019, 11:45
Witam
Mam problem z laptopem Acer ES1-533-P8ZH na płycie LP-D641P Rev:1A.
Laptop był zalany.
Wykonałem następujące pomiary.
PQ304
D - 19.5V
S - 1.70V
G - 2.5V
PQ305
D - 19.5V
S - 2.5V
G - 2.5V
PQ306
D - 2.5V
S - 0V
G - 0V
Z tego co widzę tam gdzie jest 2.5V powinno być 17.4V.
Proszę o pomoc. Co może powodować taki spadek napięcia?

Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by Google Adsense [BOT] 24 March 2019, 11:45

#2 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by Machine 25 March 2019, 08:39
Thoroughly clean the flooded area and replace all the oxidized components.
Z tego co widzę tam gdzie jest 2.5V powinno być 17.4V.

There are 17.4v only with functioning and connected battery.
Measure the voltages of PL402, PL404.
Measure the voltages on pins 11, 12, 17 of PU401.
Measure the voltages on pins 11, 12, 15, 17 of PU402.

#3 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 25 March 2019, 17:56
Napięcia są następujące:
PL402 - 0V
PL404 - 5,17V
PU401
Pin 11- 4,06V
Pin 12 - 0V
Pin 17 - 3,35V
PU402
Pin 11 - 4,06V
Pin 12 - 3,33V
Pin 15 - 5,12V

Po wciśnięciu reset na SWG2 na PL404 pojawiło się 5,2V. Reszta bez zmian.
Pin 17 - 3,4V

#5 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 26 March 2019, 18:20
Witam
Napotkałem mały problem.
Bios chip na tej płycie to GD25LB64CSIG.
Programator którego używam to SOFi SP8 i nie znajduje tego chipu na liście obsługiwanych .
Jaki zamienny chip mogę wybrać z listy aby prawidłowo wgrać wsad biosu i nie uszkodzić chipu?

#6 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by matic 26 March 2019, 21:06
This BIOS chip is a low voltage (1,8V) memory chip, which could not be directly programmed with your programmer.
You need to use 1,8V adapter.

For example:
Image

Or you may also build the simplified version of adapter according to the following schematic:
Image
(You may also use another diodes, but they should be the schottky ones.)

Try to select the chip GD25Q64B.

#7 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by Vogelek23 27 March 2019, 00:22
matic wrote:Or you may also build the simplified version of adapter...
There is a full PCB project available on our forum (DIY section): adapter-do-programatora-dla-kosci-spi-1-8v-konwerter-poziomow-z-3-3v-do-1-8v-t55187.html

#8 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 5 April 2019, 16:13
Witam.
Zamówiłem adapter ale nadal nie mogę zaprogramować chipu.
Wybrałem z listy GD25Q64B i przy programowaniu występuje ostrzeżenie ze chip nie pasuje ale pyta czy kontynuować.
Jednak programowanie kończy się niepowodzeniem.
Załączam zrzut ekranu.
Image
Jakieś inne pomysły jak mogę zaprogramować wsad biosu?
Dodam jeszcze ze udało mi się zgrać bios z chipu mimo ostrzeżenia że chip nie pasuje.

#9 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by matic 5 April 2019, 17:46
You get the "Device ID Error", because the chip model which you program does not match with the selected chip in programmer software. You can not avoid this error, because the chip which you program is not supported in programmer software. But the programming should be successful regardless of this error.

Try to select the chip "GigaDevice GD25B64C [SOP8]" and try to flash it again.

#10 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 7 April 2019, 00:27
Witam.
Bios udało się zaprogramować poprawnie.
Po wlutowaniu niestety dalej nie zadziałał na włącznik i teraz wszystkie napięcia jakie miałem wcześniej pokazują się następująco.
PL402 - 0V
PL404 - 0V
PU401
Pin 11- 0V
Pin 12 - 0V
Pin 17 - 0V
PU402
Pin 11 - 0V
Pin 12 - 0V
Pin 15 - przeskoki 2,2V do 4V

Na PQ302
D 19,5V
S - 0V
G - przeskoki z 0,02-0,15V
Do tego jeszcze na PU301 PIN 6 jest tylko 2,5V
Co mogłem upalić?
Wymienić PQ302 czy PU301? Czy może coś innego?

#11 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by matic 7 April 2019, 09:49
Measure the voltages to ground on pins 2, 3, 4, 5, 6, 16, 17, 20 of charger chip PU301 with connected charger only (without battery).

Measure the resistance to ground on shunt resistor PR303.

#12 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 7 April 2019, 18:47
Witam.
Nie wiem jak to się stalo ale dzisiaj jak zmierzyłem napiecia jeszcze raz to prezentują sie następująco:
PL402 – 0V
PL404 - 0V
PU401
Pin 11- 4,05V
Pin 12 – 3,5V
Pin 17 – 3,35V

PU402
Pin 11 – 4,06V
Pin 12 – 3,33V
Pin 15 – 0V

PU301
Pin 1 19,5V
Pin 2 19,5V
Pin 3 19,5V
Pin 4 25V
Pin 5 3,3V
Pin 6 2,5V
Pin 7 0V
Pin 8 3,3V
Pin 9 3,3V
Pin 10 0,75V
Pin 11 1,7V
Pin 12 1,7V
Pin 13 3,5V
Pin 14 0V
Pin 15 0V
Pin 16 6,04V
Pin 17 5,8V
Pin 18 5,8V
Pin 19 2,5V
Pin 20 19,5V

PR303 1,3 Ohm
Dodam że nie mam żadnych napięć na UC2.

#13 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by matic 7 April 2019, 20:46
mochol1986 wrote:PR303 1,3 Ohm
This is probably not the resistance to ground, but the resistance of resistor?

Measure the voltages to ground on pins 6, 67, 100, 110, 112, 114, 115, 122, 123, 124 of KBC chip.

#14 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 11 April 2019, 03:47
Witam
Przy bliższej inspekcji PU402 piny 2-5 wyglądały na przypalone. Okazało się po wlutowaniu PU402 ze aż przypaliły się do laminatu.
Image
Image
Zamówiłem nowy chip podam napięcia jak już będzie nowy chip na miejscu.

#15 Re: Laptop Acer ES1-533-P8ZH płyta LP-D641P Rev:1A zalany nie włącza się.


by mochol1986 20 April 2019, 16:15
Witam
Niestety wlutowanie PU402 nie przyniosło efektu.
Uszkodzenia na płycie są zbyt duże.
Proszę o zamknięcie tematu i dziękuję wszystkim za pomoc. Pozdrawiam.

Who is online

Users browsing this forum: krisark and 4 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.