• ASRock N68-S -blue screen

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 ASRock N68-S -blue screen


by rubin714p 10 October 2016, 08:50
Proszę o analizę pliku mini dump z Windows xp.
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini101016-03.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Mon Oct 10 07:52:33.953 2016 (GMT+2)
System Uptime: 0 days 0:03:18.645
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
....................................................
Loading User Symbols
Loading unloaded module list
...........
Unable to load image win32k.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 10000050, {e2a6c000, 1, bf8ebdad, 1}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Probably caused by : win32k.sys ( win32k+ebdad )

Followup: MachineOwner
---------Czy to nie jest dziwne? Odpalam przeglądarkę Opera. Chcę wyszukać np: tester triaków i tyrystorów. Google wyświetla mi wynik wyszukiwania. Więc interesujące mnie tematy otwieram w nowej karcie. I cóż tylko wtedy gdy chcę otworzyć temat na słynnej elektroda.pl wywala mi blue screena.Więc o co chodzi?

Re: ASRock N68-S -blue screen


by Google Adsense [BOT] 10 October 2016, 08:50

#2 Re: ASRock N68-S -blue screen


by mar244 10 October 2016, 22:05
Witam, zanim kolega zacznie szaleć po systemie proponuje na samym początku sprawdzenie pamięci RAM programem MEMTEST minimum 12 godzin. Następnie sprawdzenie SMART dysku oraz stanu jego powierzchni poprzez program MHDD, jeśli tutaj będzie wszystko w porządku wtedy będziemy kombinować z systemem, ja osobiście taki plan działania bym podjął.

#3 Re: ASRock N68-S -blue screen


by rubin714p 12 October 2016, 05:20
Az 12 godz memtest? Ale dlaczego tylko na Operze się tak dzieje? No nic najpierw zrobie MHDD a pózniej ten Memtets.

-- 12 października 2016, 06:16 --

Tak wygląda SMART z MHDD .Proszę o opinie.Memtest już włączony .Zobaczymy pod koniec dnia jakie efekty.
Image

#4 Re: ASRock N68-S -blue screen


by rubin714p 12 October 2016, 17:57
Memtest 12godz
Image

#5 Re: ASRock N68-S -blue screen


by mar244 12 October 2016, 22:13
Jeśli chodzi o dysk to jest w średnim stanie, parametr nr 1 jest troszkę nadwyrężony, skopiował bym profilaktycznie ważne dane z tego dysku.

Memtest nie wykazał błędów, czyli pamięci mamy ok.


Ja osobiście proponował bym reinstalacje systemu Windows, ponieważ często po takich naprawach problem lubi wracać.

#6 Re: ASRock N68-S -blue screen


by SebastianR 26 October 2016, 21:44
Nie wiem czy temat jeszcze aktualny, ostatnio przerabiałem podobny temat (restarty na YT) Komputer miał zainstalowane 2 moduły RAM, okazało się że to jedna z nich powoduje problem z restartem kompa. (Pomimo pozytywnych wyników memtest na obydwóch kościach :shock: ) Jeżeli reinstalacja OS nie pomogła to sugerowałbym podłożenie innych pamięci.

#7 Re: ASRock N68-S -blue screen


by rubin714p 27 October 2016, 09:53
Przez chwilę było ok.A wczoraj otworzyłem kilka okien w przeglądarce i blue screen .

#8 Re: ASRock N68-S -blue screen


by mar244 27 October 2016, 21:06
Czy kolega podmienił profilaktycznie procesor na inny ?

#9 Re: ASRock N68-S -blue screen


by Vogelek23 28 October 2016, 08:50
Kolego rubin714p - z kim rozmawiasz, z samym sobą??? Bo nie zauważyłem, abyś wykonywał lub opisywał wyniki działań, sugerowanych przez przedmówców. Taka diagnostyka to o kant d... potłuc. Ktoś wcześniej sugerował podłożenie pamięci RAM, jeszcze wcześniej zalecano reinstalację systemu operacyjnego. Jeśli masz zamiar tracić czas tych osób, to ja ten wątek zaraz usunę do kosza. Proszę zatem niezwłocznie ustosunkować się do podpowiedzi, zaś pozostałe osoby proszę o ciszę w temacie, dopóki autor nie wykona tych czynności.

#10 Re: ASRock N68-S -blue screen


by rubin714p 28 October 2016, 09:54
Kolego Vogelek23- odpowiedziałem na pytanie SebastianR-które brzmi "Nie wiem czy temat jeszcze aktualny, ostatnio przerabiałem podobny temat (restarty na YT) Komputer miał zainstalowane 2 moduły RAM, okazało się że to jedna z nich powoduje problem z restartem kompa. (Pomimo pozytywnych wyników memtest na obydwóch kościach :shock: ) Jeżeli reinstalacja OS nie pomogła to sugerowałbym podłożenie innych pamięci." żadko rozmawiam sam ze sobą zwłaszcza od kiedy odstawiłem alkohol.System owszem przeinstalowany -co do procesora -to nie posiadam na podmianę,RAM też nie posiadam . Temat można zamknąć .Co do wykonywania poleceń -memtest -zrobiony ,SMART -mhdd zrobiony,więc polecenia wykonałem. P.s. tylko dlaczego objaw jest wyłacznie na Opera?Nie ma tego na firefox.

#11 Re: ASRock N68-S -blue screen


by Vogelek23 28 October 2016, 10:22
rubin714p wrote:co do procesora -to nie posiadam na podmianę,RAM też nie posiadam .
I tu jest problem - gdybyś napisał konkretnie, że nie masz części na podmianę, nie byłoby mojego komentarza.

Co zaś do Opery, jeśli problem uwidacznia się wyłącznie na tej przeglądarce (natomiast na Chrome, Firefox czy wbudowanym Internet Explorer nie występuje), to sugerowałbym zaktualizować Operę do najnowszej i jeśli to nie pomoże, zrezygnować z jej używania do momentu, gdy nie zostanie wydana bardziej stabilna wersja.

Z uwagi jednak na to, że nie masz czym zdiagnozować problemu (brak części do podstawienia), wątek zamykam.

Re: ASRock N68-S -blue screen


by Google Adsense [BOT] 28 October 2016, 10:22

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.