Good day!
Help me to understand!
Came not included with k.z. hub SR2C4, basking warm duty 3.3v.
Replaced the hub. The duty is, turns on, there is no image. There is no voltage on the coil of the PL401-PL405 with the native bios. On the coil PL406 is present regularly. With the support, the dump immediately turns off when turned on, but the power supply of the processor appears 0.8 V.
The picture does not show, the memory changed. Processor chip rewrote another.
Power and resistance coils attached
PL301 (1.23 V) 43 Ω
PL703 (1.28 V) 192 Ω
PL603 (0.82 V) 7 Ω
PL606 (0.82 V) 7 Ω
PL406 (1.05 V) 8.7 Ω
PL405 2.1 Ω
PL404 2.1 Ω
PL403 2.1 Ω
PL402 3.8 Ω
PL401 3.8 Ω
PL701 (0.96 V) 22.4 Ω
PL802 (1.06 V) 60.5 Ω
PL201 (3.3 V) 24 kΩ
PL202 (5 V) 100 kΩ
PL101 (0.84 V) 1.4 MΩ
Help me to understand!
Came not included with k.z. hub SR2C4, basking warm duty 3.3v.
Replaced the hub. The duty is, turns on, there is no image. There is no voltage on the coil of the PL401-PL405 with the native bios. On the coil PL406 is present regularly. With the support, the dump immediately turns off when turned on, but the power supply of the processor appears 0.8 V.
The picture does not show, the memory changed. Processor chip rewrote another.
Power and resistance coils attached
PL301 (1.23 V) 43 Ω
PL703 (1.28 V) 192 Ω
PL603 (0.82 V) 7 Ω
PL606 (0.82 V) 7 Ω
PL406 (1.05 V) 8.7 Ω
PL405 2.1 Ω
PL404 2.1 Ω
PL403 2.1 Ω
PL402 3.8 Ω
PL401 3.8 Ω
PL701 (0.96 V) 22.4 Ω
PL802 (1.06 V) 60.5 Ω
PL201 (3.3 V) 24 kΩ
PL202 (5 V) 100 kΩ
PL101 (0.84 V) 1.4 MΩ