• Kyocera C5020N - problem z domknięciem top cover

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Kyocera C5020N - problem z domknięciem top cover


by arvika 15 September 2012, 11:36
Użytkuję drukarkę Kyocera C5020N i sprawuje się świetnie. Niestety skończył się toner Magneta i musiałem zakupić nowy. Jednak po zorientowaniu się w cenach okazało się że można kupić całą taką drukarkę z kompletem tonerów (prawie pełnych) w cenie 2x tańszej (!) niż pojedynczy toner Magneta do tej drukarki. Drukarka zakupiona, wraz z wydrukiem statusu, wiec zakładam że przed wysyłką była sprawna. Dotarała do mnie w dobrym stanie, jedyne co, to czujnik zamknięcia górnej klapy był wciśnięty - zablokował się. Po odblokowaniu i włączeniu drukarki mam niestety komunikat "close top cover". Przełożenie tonerów z "nowej" do "starej" odpada bo są ciut inne - od spodu inaczej wyprofilowany plastik i po prostu nie wskakują na swoje miejsce. Zakupiona drukarka nie ma na stronie czołowej nadrukowanego dokładnego modelu więc podejrzewam że może być to troche inny model - wizualnie wygląda identycznie jak C5020N.

Został przełożony nawet cały moduł zamknięcia klapy z czujnikiem ze starej do nowej i mam ten sam komunikat.

Czy ktoś serwisuje drukarki i mógłby podpowiedzieć w czym może być problem?

Re: Kyocera C5020N - problem z domknięciem top cover


by Google Adsense [BOT] 15 September 2012, 11:36

#2 Re: Kyocera C5020N - problem z domknięciem top cover


by sandro123 16 September 2012, 12:49
I have only service manual, read it?



You have to be logged in to view the files attached to this post.

#3 Re: Kyocera C5020N - problem z domknięciem top cover


by marek216 16 September 2012, 16:38
Spotkałem się z tym że ułamany był "dzindzel" na samej klapie - zwróciłeś na to uwagę, ew. ręcznie zamykałeś czujnik ?

#4 Re: Kyocera C5020N - problem z domknięciem top cover


by arvika 16 September 2012, 16:40
Tak, to zostało sprawdzone w pierszej kolejności. Nie jest to problem z ułamanym mechanizmem zamykania.

#5 Re: Kyocera C5020N - problem z domknięciem top cover


by marek216 16 September 2012, 16:48
Więc inaczej.
Zamknij ręcznie czujnik frontu i zacznij sprawdzać inne czujniki zamknięcia.
Możliwe że maszyna rzuca błędem frontu a boli ją coś innego.
Sprawdziłeś całość zgodnie z SM
Image

#6 Re: Kyocera C5020N - problem z domknięciem top cover


by arvika 16 September 2012, 17:00
Ponieważ jest niedziela a sprzet stoi w firmie to sprawdzę to jutro. Dopiero dziś Sandro umieścił SM, za co pięknie mu dziękuję. Zdążyłem już przejrzeć jego zawartość i widziałem stronę którą zamieściłeś.

Re: Kyocera C5020N - problem z domknięciem top cover


by Google Adsense [BOT] 16 September 2012, 17:00
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: No registered users and 0 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.