• HP dv9500 (AT5) - brak reakcji, po przepięciu

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 23 July 2014, 08:09
Witam.

Potrzebuję waszej pomocy.

Najprawdopodobniej laptop dostał piorunem w czasie burzy. Brak reakcji na pwr_on.

Wymienione:
PQ61, PQ3, PU1, PD16, PQ62.

Po podpięciu zasilacza na PQ61 n.1-3 mam tylko 4V.
Gdy wejdę napięciem omijając PQ61 lub zwierając nogi 1-3 z 5-8 to zasilacz laboratoryjny nie wykazuje zwarcia.
Napięcia 3 i 5V pojawiają się na cewkach, na włączniku 3V również, ale po kliknięciu pwr_on laptop nie startuje.

Co tu może być nie tak z tymi 4V?

Pozdrawiam.

Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by Google Adsense [BOT] 23 July 2014, 08:09

#2 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by p4p 23 July 2014, 10:57
Jeśli po burzy to sprawdź czy przy podpiętym zasilaniu nie grzeje się układ Lan bo nic nie piszesz o poborze płyty.

#3 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 23 July 2014, 11:08
Pobór prądu cały czas 0A.
10mA gdy zewrę n.5-8 z n.1-3 PQ61.
Nie znalazłem żadnego grzejącego się układu.

#4 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 24 July 2014, 13:09
Ktoś ma jakieś pomysły?

#5 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by ADAMK101 25 July 2014, 12:10
adresowanie układu BIOS ?

#6 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by farmer 25 July 2014, 13:09
DaCoPL wrote:Ktoś ma jakieś pomysły?


Można wykonać jakieś pomiary? Na początek n.4 PQ61 oraz wyprowadzenia PU1.

#8 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 28 July 2014, 08:27
PQ61 n.4 = 0,01 V

PU1
n.1 = 18,65 V
n.4 = 4,09 V
n.8 = 3,22 V
n.10 = 0 V
n.11 = 5,35 V
n.12 = 3,32 V
n.24 = 5,08 V

PQ64
n.2 = 5,35 V
n.3 -= 0 V

#10 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 28 July 2014, 13:34
PR12 ok.
PR11 ma 15k, a nie 25,5k (ale tak samo mam na rezystorach z innych płyt AT5 więc podejrzewam, że jest ok).
PC23 ok.

#12 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 29 July 2014, 08:47
PD23 k.= 18,81 V, a.= 14,85 V
PD20 all pins about 19 V
PD22 k.= 18,77 V, a.= 19,30 V
PD21 n.c.

PQ67
n.1 = 14,65 V
n.2 = 19,31 V
n.3 = 0 V

PQ66
n.2 = 0 V
n.3 = 9,50 V

PQ65
n.2 = 9,50 V
n.3 = 0 V

#13 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu  [SOLVED]


by ADAMK101 29 July 2014, 12:57
Następny temat koszmar - tylko dział nie nazywa sie już PROFFESIONAL :)
Czy masz VH28 ??? wytwarzane w powielaczu diodowym PD20
Najczęstsza usterka od strony zasilania to uszkodzony IMZ2.
Niby go wymieniłeś , ale łatwo sie pomylić.....

#15 Re: HP dv9500 (AT5) - brak reakcji, po przepięciu


by DaCoPL 29 July 2014, 14:13
Adam.... zanim dopisałeś zdanie o pomyleniu się, postanowiłem jeszcze się przyjrzeć tranzystorkowi PQ62. I rzeczywiście czeski błąd się wkradł w lutowaniu.

Poprawiłem, działa.
Tyle w tym temacie.
Dzięki.

Who is online

Users browsing this forum: No registered users and 1 guest

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.