• Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.


by muchamm 26 December 2020, 09:23
Cześć.
Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu zarówno na wbudowanym monitorze jak i na zewnętrznym.
Po włączeniu wentylatory kręcą się przez cały czas, procesor po chwili jest ciepły.
Na płycie są napięcia 12V, 3.3V, 5V, 1.5V, 1V. Po wyjęciu pamięci z banków płyta po włączeniu piszczy - czyli zachowuje się poprawnie.
Bateria RTC ma 3.05V i nie pomaga jej wyjęcie i zwarcie pinów w płycie.
Był już gdzieś w serwisie i podobno był wgrywany nowy bios, ale na płycie brak oznak lutowania kości biosu, natomiast ktoś lutował tranzystory na płytce zasilającej podświetlenie.
Pozdrawiam.

Re: Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.


by Google Adsense [BOT] 26 December 2020, 09:23

#2 Re: Gell optiplex 9020 all-in-one, płyta IPPLP-AZrev A00 brak obrazu.


by matic 26 December 2020, 11:31
Hello!

Start with reflashing the BIOS chip. Don't forget to save the old dump.

#3 Re: Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.


by muchamm 27 December 2020, 16:42
Cześć.
Znalazłem wsady do tej płyty.
Po przeprogramowaniu obraz się pojawia po ok 14 sek od włączenia.
System po podłączeniu dysku też zaczyna się uruchamiać.
Czy przyczyną takiego zachowania może być wsad i inny ME region?
Jak można to poprawić?
Pozdrawiam.

#4 Re: Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.


by matic 27 December 2020, 20:19
muchamm wrote:Czy przyczyną takiego zachowania może być wsad i inny ME region?
Yes, very likely.

muchamm wrote:Jak można to poprawić?
Try to transfer the ME-region from old (original) BIOS dump to the new one.

#5 Re: Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.


by muchamm 28 December 2020, 12:24
Cześć.
Jak napisałem na początku właściciel twierdzi, że poprzedni serwis wgrywał bios, chociaż kości nie były lutowane.
Dlatego nie jestem pewien czy wsady, które zgrałem pochodzą z tej płyty.
Ponadto próbowałem odczytać ME programem "ME Analyzer", ale ten powoduje u mnie otwarcie okienka DOS (albo czegoś podobnego) i po chwili to znika. Czy to narzędzie może nie działać z WIN XP?
Zastanawiam się jeszcze, czy jak uruchomię plik wykonywalny ze strony DELL-a "OptiPlex_9020_AIO_A17.exe" może rozwiązać problem?
Pozdrawiam.

#6 Re: Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.  [SOLVED]


by matic 28 December 2020, 13:10
muchamm wrote:Ponadto próbowałem odczytać ME programem "ME Analyzer", ale ten powoduje u mnie otwarcie okienka DOS (albo czegoś podobnego) i po chwili to znika. Czy to narzędzie może nie działać z WIN XP?
I don't know, because I don't use this software.

muchamm wrote:Zastanawiam się jeszcze, czy jak uruchomię plik wykonywalny ze strony DELL-a "OptiPlex_9020_AIO_A17.exe" może rozwiązać problem?
You can try, but it usually does not help.
If it does not solve the issue, you can open a new topic in "ZAPYTANIA O DOKUMENTACJE/BIOS" department and ask for cleaning the ME-region. Don't forget to specify the major IC's markings according to the rules.

#7 Re: Dell optiplex 9020 all-in-one, płyta IPPLP-AZ rev A00 brak obrazu.


by muchamm 28 December 2020, 17:50
Cześć.
Kolega matic miał rację zainstalowanie biosu z pliku DELL-a "OptiPlex_9020_AIO_A17.exe" nie rozwiązało problemu.
W czasie instalacji "instaler" znalazł, raportował różnice i wprowadził zmiany, ale dalej system startuje ok 14 sek. od przyciśnięcia przycisku "ON/OFF"
Wydaje się że, poza tym wszystko działa poprawnie.
Tematu jeszcze nie zamykam, spróbuję pójść za radą.
Pozdrawiam.

Who is online

Users browsing this forum: No registered users and 2 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.