• Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.

#1 Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 15 July 2019, 16:48
Witam, w bios informacja o zasilaczu to "unknown", zasilacz oraz gniazdo sprawne, sprawdzone na innym laptopie, gdzie mogę szukać przyczyny usterki?

Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by Google Adsense [BOT] 15 July 2019, 16:48

#2 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 15 July 2019, 19:04
Hello!

Measure the voltages to ground on all pins of transistor PQ2 and chip PU1.

#3 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 15 July 2019, 19:54
pomiar na włączonej płycie bez podłączonej baterii:
PQ2:
1- 5,02V
2- 0V
3- 0V
PU1:
1- 0V
2- 0V
3- 0,06V
4- 0,06V
5- 5,02V
6- 0V

na wyłączonej płycie oraz z podłączoną baterią pomiary są takie same

#4 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 15 July 2019, 20:48
Measure the resistances to ground on all pins of transistor PQ2 and on pin 4 of PU1.

#5 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 15 July 2019, 21:30
Rezystancja względem masy na:
PQ2:
1 - 21Ω
2 - BRAK
3 - BRAK
PU1:
4 - BRAK

#6 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 15 July 2019, 21:43
jendrasso wrote:Rezystancja względem masy na:
PQ2:
1 - 21Ω
It is a short circuit to ground.
Which pin of PQ2 is pin 1? Is it pin G, S, or D according to the following picture?

Image

#7 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 15 July 2019, 21:50
D

#8 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 15 July 2019, 21:55
Disconnect the charger form the laptop and remeasure the resistance to ground on pin D of PQ2.

#9 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 15 July 2019, 22:06
24Ω

#10 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 15 July 2019, 22:10
It is more than likely damaged DC socket of the laptop. Disconnect it from the motherboard and check the resistance again.
If the resistance will considerably increase (to the kΩ range or greater) it is damaged DC socket for sure.

Image

#11 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 15 July 2019, 22:15
po odłączeniu gniazda zasilania jest 15,3Ω

#12 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 15 July 2019, 23:12
Please, post a clear picture of transistor PQ2 with nearby surroundings.

#13 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 16 July 2019, 07:33
Image

#15 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 16 July 2019, 09:02
jeśli chodzi o rezystancję do masy na PD5 to przy wyłączonej płycie i odłączonym gnieździe zasilania jest to:
D - 0,06Ω
na pozostałych to 15,2Ω

#16 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 16 July 2019, 09:38
Remove the diode PD5 from the board and check the resistance to ground on D of PQ2 again.
If the resistance will considerably increase (to the kΩ range or greater) it is damaged diode PD5 for sure.

#17 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 16 July 2019, 11:16
po zdjęciu PD5 na D PQ2 jest brak rezystancji, mam PD5 ze sprawnej takiej samej płyty i po wlutowaniu w tą niesprawną zaczęło identyfikować zasilacz. Także strzał w dziesiątkę. Czy mogę prosić o nazwę tego elementu żebym mógł zamówić ?

#18 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 16 July 2019, 15:20
PD2= AZC199-02S
It is an ESD protection (suppressor) diode.
You may find it at most dell boards.



You have to be logged in to view the files attached to this post.

#19 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by jendrasso 16 July 2019, 16:01
Chodziło mi o PD5, niestety nie mam żadnej uszkodzonej płyty z której mógłbym go wylutować, czy PD5 też ma takie oznaczenie jakie napisałeś?

#20 Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by matic 16 July 2019, 19:15
jendrasso wrote:czy PD5 też ma takie oznaczenie jakie napisałeś?
No, it doesn't. The diode on your board has different designation, but it has the same characteristics as the suggested one.

By the way, the laptop should work normally without that diode. If you want to test it, connect the charger to the laptop first, then connect the charger to mains 230V wall socket. That way you will prevent the possible damage on the board without the protection diode PD2.

Re: Dell Latitude E5550 płyta LA-A913P nie rozpoznaje zasilacza


by Google Adsense [BOT] 16 July 2019, 19:15

Who is online

Users browsing this forum: No registered users and 3 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.