• Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się

Forum rules:Click here to view the forum rules

  1. Topic title should contain: the device's manufacturer, full model and the brief description of problem.
  2. Topic message should contain: the PCB marking code (required in case of hardware repairs), an extended description of problem, things you have checked/replaced/measured, your conclusions and the question. If you are not able to find the PCB marking code, please read THIS TOPIC. If you still cannot locate the PCB markings, please upload a clean, both-side photos of the mainboard - it is required to remove any films, modules or brackets possibly covering these markings.
  3. Before posting a new topic please read all topics in TRAININGS subforum and make a preliminary diagnostic based on the content of those trainings.
  4. Uploading of any complete schematics, BIOS files or any other kind of documentation, or linking to 3rd party websites with such files, is STRICTLY PROHIBITED. You can only upload the small portion of documentation or, link to BIOS file on UNVERIFIED BIOS FILES subforum, which simplifies the diagnostics/repair. You are not allowed to upload more then one complete page of instruction/schematic per single topic. The file you upload must not contain any watermarks, "confidential" markings, links or email addresses and cannot be password-protected.
  5. It is only permitted to describe one faulty device per single topic - you should always open a new topic for each subsequent device.
  6. Requesting of the full schematics, BoardView files, BIOS files or any other kind of documentation is NOT ALLOWED in this subforum. If you need to ask for any of these, you should open a new topic in DOCUMENTATION/BIOS REQUEST subforum.
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

#1 Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 13 September 2018, 15:41
Obsada:
CPU: SR1EK
GPU: N16V-GM-B1
KBC: IT8987E BXA
BIOS: Winbond W25Q64FVSIQ

Laptop na początku mignął diodą na ułamek sekundy z poborem prądu ok 100mA, wgrałem inny BIOS i po tym zabiegu nawet nie mignie dioda a max pobór prądu to 6mA po wciśnięciu włącznika(napięcie na włączniku 3.3V i po wciśnięciu spada do 0V), po wgraniu oryginalnego wsadu to samo. Działa ładowanie baterii, ładuje ją prądem ok 1A, na cewkach jest 3.3V, 5V. Na cewce przy baterii jest 0.8V, po włożeniu baterii na cewce jest ponad 15V. Na reszcie cewek 0V.
PL5 - 45.7kΩ
PL8 - 177Ω
PL10 - 770Ω
PL6 - 10Ω
PL7 - 10Ω
cewka zasilania pamięci GPU 9Ω, chyba PL2.
Co powinienem jeszcze zmierzyć?

Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by Google Adsense [BOT] 13 September 2018, 15:41

#3 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 13 September 2018, 16:10
Mam napięcie tylko na cewkach od 3.3 i 5V oraz na jednej przy złączu baterii. Na reszcie 0V, nawet po wciśnięciu włącznika. Zanim przeprogramowałem BIOS to pojawiały się przez ułamek sekundy napięcia na reszcie cewek poza cewkami od GPU ale to może dlatego, że płyta nie przeszła procedury POST.

#5 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 14 September 2018, 16:02
Mam taką samą wersję i obsadę płyty jak dan1200rr, a niestety jeszcze nie umiem wyczyścić MeRegion więc nie widzę sensu pobierania tego wsadu. Próbowałem kilku wsadów z elektrody i badcaps. Zmieniłem kość biosu na Gigadevice 25B64BSIG i mam efekt taki jak na początku czyli po wciśnięciu włącznika przez ułamek sekundy pobór prądu 100mA. Zwarć na cewkach nie ma. Jeszcze raz obejrzałem dokładnie płytę, zauważyłem zerwany i zwarty kondensator do rezystora zaznaczony na czerwono na zdjęciu:

Image

Niestety po poprawnym wlutowaniu nic się nie zmieniło. Nie wiem dlaczego laminat w tym miejscu wygląda jakby był przypalony. Z drugiej strony jest złącze dodatkowego USB ale zwarć na USB nie ma.

Zapożyczyłem zdjęcie z innego wątku:
Image

1 - 0V / 10.5Ω
2 - 0V / 10.5Ω
3 - 0V / 9,7Ω
4 - 0V / 176Ω
5 - 0V / 5.9kΩ
6 - 0V / 680Ω
7 - 5V / 21kΩ
8 - 3,3V / 11KΩ
9 - 0V / 45.6kΩ
10 - 0.8V 1.2MΩ

#6 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by matic 14 September 2018, 16:29
The resistances seems ok.

Without cleaning the ME-region of the BIOS file on the upper link the laptop should turn on.
If the ME-region does not fit, the problem is likely to be one of the following:
-a picture on the screen appear after a while,
-the computer turns off after some time,
-the fan runs at high speed.

If the laptop still won't turn on with this BIOS dump, we can exclude the BIOS failure.

#7 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 17 September 2018, 11:56
Wgranie BIOS z elvikom nic nie dało, efekt taki sam jak na innych wsadach czyli mignie dioda na ułamek sekundy z poborem prądu 100mA.

#8 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by matic 17 September 2018, 20:05
Do you have an oscilloscope?

#9 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 17 September 2018, 20:42
Niestety nie mam oscyloskopu ale będzie to prawdopodobnie następny zakup. Próbowałem odczytać wsad KBC ale mam tylko RT809F+PEB-1 i nie udało się. SVOD już w drodze więc będzie więcej możliwości.

#10 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by Machine 18 September 2018, 07:28
Measure the voltages on pins 11, 12, 18, 19, 26, 72, 100, 112, 119, 123 of KBC.
Measure the voltages on pin 107 of the KBC in the following cases:
at the power off
with pressed power on
to the power on.

#11 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 18 September 2018, 09:42
Machine dzięki za naprowadzenie na trop. Przy pomiarze pinu 100 S5_ON zauważyłem, że nie ma napięcia a jest połączony z rezystorem R494 10K. Po jednej stronie rezystora było 3.3V a od strony KBC 0V, rezystor miał przerwę. Niestety po wlutowaniu sprawnego rezystora jest tak samo. Wylutowałem rezystor aby sprawdzić rezystancję do masy na pin100 i wynosi ona 46kΩ. Mam uszkodzony KBC?
Pin12- 1.85V
Pin26 - 3.3V
Pin100 - 16mV
Inne 0V
Pin 107 - 3.3V po wciśnięciu włącznika spada do 0V

#12 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by matic 18 September 2018, 14:38
Reflash the KBC chip with programmer.
If it does not change anything, replace the KBC chip.

#13 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by Machine 18 September 2018, 15:19
Replace the bios and remember to save the old one.
Disconnect the RTC battery and all other power supplies. Short the RTC battery pins for 20 seconds. Reconnect everything.
If after all these operations do not measure a voltage on the previously indicated pins of the KBC you have to replace it.

#14 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 5 October 2018, 12:55
Wymieniłem KBC ale po zaprogramowaniu SVOD pokazał, że może być problem z pewnymi danymi. Efekt jest taki sam jak przed wymianą KBC czyli brak napięcia na S5_ON i laptop nadal nie startuje. Niestety nie znalazłem wsadu KBC do tej płyty a SVOD pokazał to:
Check connection ...
Received ITE ID -> 8987 rev -> 01
INIT complete.
ERASE ...
There may be a problem with the block:
From ADR: 1E000h to 1E400h [FE (FCh)]
From ADR: 1FC00h to 20000h [FE (FCh)]
ERASE complete.
The number of bytes value of FFh -> 64685
Writing, please wait ... complete.
Verify ... complete.
The data is the same!

#15 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by Machine 5 October 2018, 13:27
Re-measures the voltages on pins 11, 12, 18, 19, 26, 72, 100, 112, 119, 123 of KBC.
Re-measures the voltages on pin 107 of the KBC in the following cases:
at the power off
with pressed power on
to the power on.

#16 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 5 October 2018, 14:44
Pin12- 1.85V
Pin26 - 3.3V
Pin72 - 3.3V
Pin123 - 0V po wciśnięciu włącznika 1.6V
Pin100 - 16mV, z drugiej strony rezystora 3.3V

Pin 107 3.3V --->0V ---->3.3V
Po wciśnięciu włącznika prąd max 5mA i tak pływa od 0-5mA.

#18 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by yasiu83 5 October 2018, 16:14
Machine wrote:Measure the resistance to ground on pin 100 of KBC.

16.6kΩ

#19 Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by matic 5 October 2018, 18:31
Reflash the new KBC chip with another dump.
You could ask for it in the appropriate department according to the rules.

Re: Acer Aspire E5-573G płyta DA0ZRTMB6D0 REV D nie włącza się


by Google Adsense [BOT] 5 October 2018, 18:31
This topic is marked as ARCHIVAL. Please only reply if your message contains the solution (Terms and Conditions p. 12.1).

Who is online

Users browsing this forum: clops35 and 4 guests

_______________________________
All rights reserved. Unauthorised copying of this website's content or any of its part is strictly forbidden.
Any trademarks, brand names, products or services published on this website belong to their legal owners, are copyrighted and used for information purposes only.